Skip to content

Washington County Fire and EMS Frequencies

Washington County in Alabama has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 23 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 453.8500 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Dispatch (not 127.3)453.8500
In 458.8500
FMNKNJX287

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Mount Vernon (MoWa) · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 4 (hex 4)
Control 769.19375, 769.44375, 769.69375, 769.94375
Mount Vernon · Mobile County Communications District
RFSS 1 · Site 1 (hex 1)
Control 769.61875, 771.34375, 771.79375, 772.03125, 772.19375, 772.81875, 774.40625
Chatom · Mobile County Communications District
RFSS 4 · Site 4 (hex 4) · NAC 004
Control 771.55625, 771.83125, 772.08125, 772.43125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 453.8500 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Mount Vernon (MoWa) site of Alabama Interoperable Radio System (AIRS). Its control channels are 769.19375, 769.44375, 769.69375, 769.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Washington County are marked encrypted.