About Millry Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Millry: Washington County Fire 453.8500 MHz, narrow FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Millry conventional frequencies
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Millry Fire Expired: Expired 11/23 | Police/Fire/DPW | 154.9800 | FMN | KNHU748 |
Washington County channels that also cover Millry
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Dispatch (not 127.3) | 453.8500 In 458.8500 | FMN | KNJX287 |
Nearest trunked radio sites
Distances are measured from the center of Millry.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Millry?
We do not have a fire dispatch channel listed specifically for Millry. The county-level fire dispatch channels in the same county: Washington County Fire 453.8500 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Millry?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Millry?
For Millry, start with the Chatom site of Mobile County Communications District. Its control channels are 771.55625, 771.83125, 772.08125, 772.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Millry fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Millry are marked encrypted.