Skip to content

Folsom Fire and EMS Frequencies

We do not have frequencies listed specifically for Folsom in Randolph County, Alabama yet. Countywide channels for Randolph County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Daviston (Alexander City/Tallapoosa County Public Safety), about 27 miles away.

About Folsom Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Folsom: Randolph County Fire 453.5000 MHz, narrow FM, 503 DPL. County-level ems dispatch that covers Folsom: Randolph County EMS 150.8300 MHz, narrow FM, 91.5 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Randolph County channels that also cover Folsom

Fire Dispatch

Fire Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph County FireRandolph County Fire – Dispatch453.5000
In 458.5000
503 DPLFMNKNJX283

EMS Dispatch

EMS Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph County EMSRandolph County EMS – Dispatch150.8300
In 160.0800
91.5 PLFMNWQJB477

Nearest trunked radio sites

Distances are measured from the center of Folsom.

Daviston · Alexander City/Tallapoosa County Public Safety
Site 6 (hex 6) · about 27 mi away
Voice 155.415, 155.535
New Site (Goldville) · Alexander City/Tallapoosa County Public Safety
Site 1 (hex 1) · about 28 mi away
Voice 152.5625, 152.7125, 155.1525, 155.8275
Calhoun County Simulcast · Calhoun-Cherokee-Cleburne County
RFSS 1 · Site 1 (hex 1) · NAC 1D0 · about 29 mi away
Control 854.1625, 854.3625, 855.7125, 856.2625
Voice 851.05, 851.075, 851.3, 851.575, 851.875, 852.1875, 852.675, 852.7, 852.75, 853.1625, 853.6125, 853.8625, 854.4125, 856.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Folsom?

We do not have a fire dispatch channel listed specifically for Folsom. The county-level fire dispatch channels in the same county: Randolph County Fire 453.5000 MHz, narrow FM, 503 DPL.

What frequency does EMS or the ambulance service use in Folsom?

We do not have a EMS dispatch channel listed specifically for Folsom. The county-level EMS dispatch channels in the same county: Randolph County EMS 150.8300 MHz, narrow FM, 91.5 PL.

What scanner do I need to listen to fire and EMS in Folsom?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Folsom?

For Folsom, start with the Calhoun County Simulcast site of Calhoun-Cherokee-Cleburne County. Its control channels are 854.1625, 854.3625, 855.7125, 856.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.