About Heflin Fire and EMS Frequencies
Quick answer: Fire dispatch for Heflin: Heflin Fire 154.2125 MHz, narrow FM, 516 DPL. County-level ems dispatch that covers Heflin: Cleburne County EMS 158.8500 MHz, DMR, CC 2 · TG 19001 · SL 1.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Heflin conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Heflin Fire | Heflin Fire – Dispatch | 154.2125 In 155.9475 | 516 DPL | FMN | WQVA256 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Heflin Fire | Heflin Fire – Tactical Channel | 156.0075 | FMN | WQVA256 |
Cleburne County channels that also cover Heflin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cleburne County Fire | Cleburne County Fire – Dispatch | 453.1500 In 458.1500 | 265 DPL | FMN | WNJS751 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cleburne County Fire | Cleburne County Fire – Tactical Channel | 453.4500 In 458.4500 | 315 DPL | FM | — |
| Cleburne County Fire | Cleburne County Fire – Tactical Channel | 453.8250 In 458.8250 | 565 DPL | FM | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cleburne County EMS Old | EMS / Search and Rescue Dispatch | 155.2350 In 150.8050 | 97.4 PL | FMN | WNUR408 |
| Cleburne County EMS | EMS / Search and Rescue Dispatch (New) | 158.8500 In 150.8050 | CC 2 · TG 19001 · SL 1 | DMR | WNUR408 |
Nearest trunked radio sites
Distances are measured from the center of Heflin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Heflin?
Fire dispatch channels listed for Heflin: Heflin Fire 154.2125 MHz, narrow FM, 516 DPL.
What frequency does EMS or the ambulance service use in Heflin?
We do not have a EMS dispatch channel listed specifically for Heflin. The county-level EMS dispatch channels in the same county: Cleburne County EMS 158.8500 MHz, DMR, CC 2 · TG 19001 · SL 1.
What scanner do I need to listen to fire and EMS in Heflin?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Heflin?
For Heflin, start with the Calhoun County Simulcast site of Calhoun-Cherokee-Cleburne County. Its control channels are 854.1625, 854.3625, 855.7125, 856.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Heflin fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Heflin are marked encrypted.