Skip to content

Heiberger Fire and EMS Frequencies

We do not have frequencies listed specifically for Heiberger in Perry County, Alabama yet. Countywide channels for Perry County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Duncanville (Alabama Interoperable Radio System (AIRS)), about 23 miles away.

About Heiberger Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Heiberger: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, no tone; Perry County Fire 453.5500 MHz, narrow FM, 026 DPL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Perry County channels that also cover Heiberger

Fire Dispatch

Fire Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Foresty Commission FireFire Suppression453.5500
In 458.5500
FMNWNLN204
Perry County FireVaiden Fire Dispatch (071)453.5500
In 458.5500
026 DPLFMNWNLN204
Perry County FireUniontown Fire Dispatch (023))453.5500
In 458.5500
026 DPLFMNWNLN204
Perry County FireMarion Fire Dispatch (051)453.5500
In 458.5500
026 DPLFMNWNLN204
Perry County FirePinetucky Fire Dispatch (031)453.5500
In 458.5500
026 DPLFMNWNLN204
Perry County FirePerry NE Fire Dispatch (125)453.5500
In 458.5500
026 DPLFMNWNLN204

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County FirePerry County Fire – Tactical Channel453.7500CSQFMNWNLN204

Fire Talk-around

Fire Talk-around frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alabama Foresty Commission FireFire Suppression453.5000
In 458.5000
FMNWNLN204

Nearest trunked radio sites

Distances are measured from the center of Heiberger.

Duncanville · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 38 (hex 26) · NAC 468 · about 23 mi away
Control 852.3375, 853.2
Voice 852.0875
Maplesville · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 33 (hex 21) · about 24 mi away
Control 769.25625
Voice 770.33125, 771.33125, 771.63125
UA Simulcast · Alabama Interoperable Radio System (AIRS)
RFSS 5 · Site 1 (hex 1) · NAC 461 · about 35 mi away
Control 773.08125, 773.33125, 773.58125, 773.83125
Voice 770.16875, 770.41875, 770.66875, 770.91875, 774.09375, 774.34375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Heiberger?

We do not have a fire dispatch channel listed specifically for Heiberger. The county-level fire dispatch channels in the same county: Alabama Foresty Commission Fire 453.5500 MHz, narrow FM, no tone; Perry County Fire 453.5500 MHz, narrow FM, 026 DPL.

What scanner do I need to listen to fire and EMS in Heiberger?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Heiberger?

For Heiberger, start with the Duncanville site of Alabama Interoperable Radio System (AIRS). Its control channels are 852.3375, 853.2 MHz. Program a control channel first; the scanner finds the voice channels from it.