About Newbern Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Newbern: Alabama Foresty Commission Fire 453.6000 MHz, narrow FM, no tone; Hale County Fire 155.5800 MHz, DMR, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Hale County channels that also cover Newbern
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alabama Foresty Commission Fire | Rural Fire Departments | 453.6000 In 458.6000 | FMN | WPZY784 | |
| Hale County Fire | Hale County Fire – Dispatch (Channel 1) | 155.5800 In 154.7100 | DMR | WQAP205 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hale County Fire | Hale County Fire – Talkaround (Channel 2) | 154.7100 | FMN | WQAP205 |
Nearest trunked radio sites
Distances are measured from the center of Newbern.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Newbern?
We do not have a fire dispatch channel listed specifically for Newbern. The county-level fire dispatch channels in the same county: Alabama Foresty Commission Fire 453.6000 MHz, narrow FM, no tone; Hale County Fire 155.5800 MHz, DMR, no tone.
What scanner do I need to listen to fire and EMS in Newbern?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Newbern?
For Newbern, start with the Duncanville site of Alabama Interoperable Radio System (AIRS). Its control channels are 852.3375, 853.2 MHz. Program a control channel first; the scanner finds the voice channels from it.