About Pine Level Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pine Level: Montgomery County Fire 453.7625 MHz, narrow FM, 192.8 PL. County-level ems dispatch that covers Pine Level: Montgomery County EMS 155.2950 MHz, narrow FM, no tone. Trunked: Montgomery Metro Communications Cooperative District, for example Montgomery County Fire talkgroup 304 (hex 130).
- 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montgomery Metro Communications Cooperative District: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pine Level, start with the Pine Level site of Montgomery Metro Communications Cooperative District, about 14 miles away. Its control channels: 851.0875, 853.6125, 853.8625 MHz.
Data updated .
Montgomery County channels that also cover Pine Level
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Fire | Pintlala Fire | 453.7625 In 458.7625 | 192.8 PL | FMN | WQLI869 |
| Montgomery County Fire | Montgomery County Fire – Dispatch – Main | 453.8250 In 458.8250 | 179.9 PL | FMN | WQLI869 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Fire | Snowdoun Fire | 453.1750 In 458.1750 | 192.8 PL | FMN | WQLK215 |
| Montgomery County Fire | North Montgomery Fire | 453.9500 In 458.9500 | 192.8 PL | FMN | WQLK215 |
| Montgomery County Fire | Rolling Hills Lakes Fire | 460.5250 In 465.5250 | 192.8 PL | FMN | WQLI869 |
| Montgomery County Fire | Mt. Meigs, Waugh Fire | 460.5500 In 465.5500 | 192.8 PL | FMN | WQLI869 |
| Montgomery County Fire | Catoma Fire | 460.5875 In 465.5875 | 192.8 PL | FMN | WQLI869 |
| Montgomery County Fire | Pike Fire – Operations | 460.6250 In 465.6250 | FMN | WQHS964 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County EMS | Rescue Squad | 155.2950 | FMN | WNZB752 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Hospital | Jackson Hospital / Clinic | 155.3400 | 77.0 PL | FMN | WQOK961 |
| Montgomery County Hospital | Baptist Medical Center South | 155.3400 | 94.8 PL | FMN | WQOK961 |
| Montgomery County Hospital | Baptist Medical Center East | 155.3400 | 103.5 PL | FMN | WQOL221 |
Montgomery Metro Communications Cooperative District
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Montgomery County Fire | Waugh-Mt Meigs Fire – Paging | 304 | 130 | D |
| Montgomery County Fire | North Montgomery Fire – Paging | 412 | 19c | D |
| Montgomery County Fire | Montgomery County Fire – South Dispatch | 417 | 1a1 | D |
| Montgomery County Fire | Montgomery County Fire – North Dispatch | 418 | 1a2 | D |
| Montgomery County Fire | Montgomery County Fire – West Dispatch | 419 | 1a3 | D |
| Montgomery County Fire | Montgomery County Fire – East Dispatch | 420 | 1a4 | D |
| Montgomery County Fire | Fire B | 298 | 12a | D |
| Montgomery County Fire | Snowdoun Fire – Local | 402 | 192 | D |
| Montgomery County Fire | Waugh-Mt Meigs Fire – Local | 403 | 193 | D |
| Montgomery County Fire | Catoma Fire – Local | 404 | 194 | D |
| Montgomery County Fire | Rolling Hills Lakes Fire – Local | 406 | 196 | D |
| Montgomery County Fire | North Montgomery Co. Fire – Local | 407 | 197 | D |
| Montgomery County Fire | South Montgomery Co. Fire – Local | 408 | 198 | D |
| Montgomery County Services | Health Department | 503 | 1f7 | D |
Nearest trunked radio sites
Distances are measured from the center of Pine Level.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pine Level?
We do not have a fire dispatch channel listed specifically for Pine Level. The county-level fire dispatch channels in the same county: Montgomery County Fire 453.7625 MHz, narrow FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Pine Level?
We do not have a EMS dispatch channel listed specifically for Pine Level. The county-level EMS dispatch channels in the same county: Montgomery County EMS 155.2950 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Pine Level?
Yes. The county-level systems that cover Pine Level are Fire and EMS talkgroups are listed for Montgomery Metro Communications Cooperative District: 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pine Level?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pine Level?
For Pine Level, start with the Pine Level site of Montgomery Metro Communications Cooperative District. Its control channels are 851.0875, 853.6125, 853.8625, 854.1125 MHz. Program a control channel first; the scanner finds the voice channels from it.