Skip to content

Fitzpatrick Fire and EMS Frequencies

We do not have frequencies listed specifically for Fitzpatrick in Bullock County, Alabama yet. Countywide channels for Bullock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Union Springs (Montgomery Metro Communications Cooperative District), about 10 miles away.

About Fitzpatrick Fire and EMS Frequencies

Quick answer: Trunked: Montgomery Metro Communications Cooperative District, for example Bullock County Fire talkgroup 780 (hex 30c).

  • Trunked radio systems that carry fire and EMS traffic here: Montgomery Metro Communications Cooperative District: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fitzpatrick, start with the Union Springs site of Montgomery Metro Communications Cooperative District, about 10 miles away. Its control channels: 769.25625, 771.04375, 771.25625 MHz.

Data updated .

Bullock County channels that also cover Fitzpatrick

Montgomery Metro Communications Cooperative District

Montgomery Metro Communications Cooperative District talkgroups
AgencyDescriptionTalkgroupHexMode
Bullock County FireBullock County Fire – Dispatch (County)78030cD

Nearest trunked radio sites

Distances are measured from the center of Fitzpatrick.

Union Springs · Montgomery Metro Communications Cooperative District
RFSS 21 · Site 21 (hex 15) · about 10 mi away
Control 769.25625, 771.04375, 771.25625, 771.63125, 772.53125, 772.83125, 774.13125
SOW (Site-On-Wheels) · Montgomery Metro Communications Cooperative District
RFSS 25 · Site 25 (hex 19) · about 21 mi away
Control 769.23125, 769.38125, 769.73125, 769.88125, 774.51875
Red Level · Montgomery Metro Communications Cooperative District
RFSS 16 · Site 16 (hex 10) · NAC 6EB · about 21 mi away
Control 851.0625, 854.1875, 854.5625, 855.0625, 855.1375, 855.5875, 855.6875, 856.2625, 856.8375, 856.9875, 857.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Fitzpatrick?

Yes. The county-level systems that cover Fitzpatrick are Fire and EMS talkgroups are listed for Montgomery Metro Communications Cooperative District: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fitzpatrick?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fitzpatrick?

For Fitzpatrick, start with the Union Springs site of Montgomery Metro Communications Cooperative District. Its control channels are 769.25625, 771.04375, 771.25625, 771.63125 MHz. Program a control channel first; the scanner finds the voice channels from it.