Waverly also extends into Chambers County, Tallapoosa County.
About Waverly Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Waverly: Lee County Fire 155.1450 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Waverly: East Alabama Health 154.0250 MHz, narrow FM, 167.9 PL. Trunked: Montgomery Metro Communications Cooperative District, for example Lee County Fire talkgroup 4302 (hex 10ce).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montgomery Metro Communications Cooperative District: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Lee County channels that also cover Waverly
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lee County Fire | Lee County Fire – Dispatch – East | 155.1450 In 153.8450 | 123.0 PL | FMN | KCE437 |
| Lee County Fire | Lee County Fire – Dispatch – West Patched to MMCCD TG 4302 | 159.1650 In 156.2250 | 173.8 PL | FMN | WPFT729 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| East Alabama Health | East Alabama Health – Dispatch (Salem site) | 154.0250 In 154.8900 | 167.9 PL | FMN | WNRX757 |
| East Alabama Health | East Alabama Health – Dispatch (Opelika site) Patched to MMCCD TG 4304 | 155.8950 | 107.2 PL | FMN | WNRX757 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| East Alabama Health | HEAR Patient Reports Patched to MMCCD TG 4303 | 155.3400 | 123.0 PL | FMN | WQOL214 |
Montgomery Metro Communications Cooperative District
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lee County Fire | Lee County Fire – Dispatch – West | 4302 | 10ce | T |
| Lee County EMS | Lee County EMS – Dispatch | 4304 | 10d0 | T |
| Lee County Hospital | HEAR-Patient Reports | 4303 | 10cf | T |
Nearest trunked radio sites
Distances are measured from the center of Waverly.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Waverly?
We do not have a fire dispatch channel listed specifically for Waverly. The county-level fire dispatch channels in the same county: Lee County Fire 155.1450 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Waverly?
We do not have a EMS dispatch channel listed specifically for Waverly. The county-level EMS dispatch channels in the same county: East Alabama Health 154.0250 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Waverly?
Yes. The county-level systems that cover Waverly are Fire and EMS talkgroups are listed for Montgomery Metro Communications Cooperative District: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Waverly?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Waverly?
For Waverly, start with the Auburn Simulcast site of Montgomery Metro Communications Cooperative District. Its control channels are 769.10625, 769.50625, 769.83125, 770.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.