About Waverly Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Waverly: Chambers County Fire 453.1500 MHz, narrow FM, 073 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Chambers County channels that also cover Waverly
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chambers County Fire | Chambers County Fire – Dispatch A | 453.1500 In 458.1500 | 073 DPL | FMN | KNAU453 |
| Chambers County Fire | Chambers County Fire – Dispatch B | 453.2375 In 458.2375 | FMN | WQCU997 |
Nearest trunked radio sites
Distances are measured from the center of Waverly.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Waverly?
We do not have a fire dispatch channel listed specifically for Waverly. The county-level fire dispatch channels in the same county: Chambers County Fire 453.1500 MHz, narrow FM, 073 DPL.
What scanner do I need to listen to fire and EMS in Waverly?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Waverly?
For Waverly, start with the Auburn Simulcast site of Montgomery Metro Communications Cooperative District. Its control channels are 769.10625, 769.50625, 769.83125, 770.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.