About Elmore County Fire and EMS Frequencies
Quick answer: Fire dispatch for Elmore County: Elmore County Fire 154.3700 MHz, narrow FM, 118.8 PL. EMS dispatch for Elmore County: Elmore County EMS 154.1000 MHz, narrow FM, no tone. Trunked: Montgomery Metro Communications Cooperative District, for example Elmore County Fire talkgroup 2933 (hex b75).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montgomery Metro Communications Cooperative District: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Elmore County, start with the Bald Knob site of Montgomery Metro Communications Cooperative District. Its control channels: 769.53125, 770.03125, 770.55625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Elmore County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elmore County Fire | Elmore County Fire – Dispatch Patched to MMCCD TG 2933 | 154.3700 In 153.8300 | 118.8 PL | FMN | WPBE209 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elmore County EMS | Rescue Squad | 154.1000 | FMN | WPRJ615 |
Elmore County trunked talkgroups
Montgomery Metro Communications Cooperative District
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Elmore County Fire | Elmore County Fire – Dispatch | 2933 | b75 | T |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Elmore County EMS | Haynes EMS – Dispatch | 2929 | b71 | T Encrypted |
Radio system sites in Elmore County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Elmore County
Common questions
What frequency does the fire department use in Elmore County?
Fire dispatch channels listed for Elmore County: Elmore County Fire 154.3700 MHz, narrow FM, 118.8 PL.
What frequency does EMS or the ambulance service use in Elmore County?
EMS dispatch channels listed for Elmore County: Elmore County EMS 154.1000 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Elmore County?
Yes. Fire and EMS talkgroups are listed for Montgomery Metro Communications Cooperative District: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Elmore County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Elmore County?
For Elmore County, start with the Bald Knob site of Montgomery Metro Communications Cooperative District. Its control channels are 769.53125, 770.03125, 770.55625, 771.20625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Elmore County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Elmore County are marked encrypted.
Are Elmore County fire and EMS talkgroups encrypted?
1 of the 2 talkgroups listed for Elmore County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.