Millbrook also extends into Autauga County.
About Millbrook Fire and EMS Frequencies
Quick answer: Fire dispatch for Millbrook: Millbrook Fire 154.3100 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Millbrook: Elmore County EMS 154.1000 MHz, narrow FM, no tone. Trunked: Montgomery Metro Communications Cooperative District, for example Millbrook Fire talkgroup 2985 (hex ba9).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montgomery Metro Communications Cooperative District: 1 talkgroup; Montgomery Metro Communications Cooperative District: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Millbrook, start with the Prattville site of Montgomery Metro Communications Cooperative District, about 6 miles away. Its control channels: 769.78125, 770.25625, 770.78125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Millbrook conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Millbrook Fire | Millbrook Fire – Dispatch Patched to MMCCD TG 2985 | 154.3100 | 118.8 PL | FMN | WZJ470 |
Millbrook trunked talkgroups
Montgomery Metro Communications Cooperative District
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Millbrook Fire | Millbrook Fire – Dispatch | 2985 | ba9 | T |
Elmore County channels that also cover Millbrook
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elmore County Fire | Elmore County Fire – Dispatch Patched to MMCCD TG 2933 | 154.3700 In 153.8300 | 118.8 PL | FMN | WPBE209 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elmore County EMS | Rescue Squad | 154.1000 | FMN | WPRJ615 |
Montgomery Metro Communications Cooperative District
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Elmore County Fire | Elmore County Fire – Dispatch | 2933 | b75 | T |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Elmore County EMS | Haynes EMS – Dispatch | 2929 | b71 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Millbrook.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Millbrook?
Fire dispatch channels listed for Millbrook: Millbrook Fire 154.3100 MHz, narrow FM, 118.8 PL.
What frequency does EMS or the ambulance service use in Millbrook?
We do not have a EMS dispatch channel listed specifically for Millbrook. The county-level EMS dispatch channels in the same county: Elmore County EMS 154.1000 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Millbrook?
Yes. Fire and EMS talkgroups are listed for Montgomery Metro Communications Cooperative District: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Millbrook?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Millbrook?
For Millbrook, start with the Prattville site of Montgomery Metro Communications Cooperative District. Its control channels are 769.78125, 770.25625, 770.78125, 771.43125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Millbrook fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Millbrook are marked encrypted.
Are Millbrook fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Millbrook are marked encrypted.