Skip to content

Dale County Fire and EMS Frequencies

Dale County in Alabama has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 27 cities and communities below for local fire departments and EMS agencies.

About Dale County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dale County: Dale County Fire 453.2500 MHz, narrow FM, 131 DPL. Trunked: S and P Communications, for example Private EMS Providers talkgroup 801 (hex 321).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dale County, start with the Dale County Central (was 2-13) site of Alabama Interoperable Radio System (AIRS). Its control channels: 770.16875, 770.41875, 772.13125 MHz.

Data updated .

Dale County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dale County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dale County FireRural Fire – Dispatch453.2500
In 458.2500
131 DPLFMNKNAU432

Hospitals & Medical

Hospitals & Medical frequencies for Dale County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dale County HospitalDale Medical Center – Patient Reports155.340071.9 PLFMNWQOL214

Dale County trunked talkgroups

S and P Communications

S and P Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Private EMS ProvidersHaynes EMS – Dispatch801321D
Private EMS ProvidersHaynes EMS – Events802322D

Radio system sites in Dale County

Program the control channel first; your scanner finds the voice channels from it.

Dale County Central (was 2-13) · Alabama Interoperable Radio System (AIRS)
RFSS 6 · Site 2 (hex 2)
Control 770.16875, 770.41875, 772.13125
Voice 772.95625, 774.88125
Dale County North (was 2-12) · Alabama Interoperable Radio System (AIRS)
RFSS 6 · Site 3 (hex 3)
Control 770.30625, 771.53125
Voice 774.45625
Newton · Metrolink NXDN
Site 5 (hex 5)
Control 461.775
Voice 462.3, 463.55, 463.875, 464.275
East Enterprise · S and P Communications
Site 23 (hex 17)
Control 151.6475
Voice 151.5575, 151.925, 153.215, 153.38
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dale County

Common questions

What frequency does the fire department use in Dale County?

Fire dispatch channels listed for Dale County: Dale County Fire 453.2500 MHz, narrow FM, 131 DPL.

Do fire departments and EMS use a trunked radio system in Dale County?

Yes. Fire and EMS talkgroups are listed for S and P Communications: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dale County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dale County?

For Dale County, start with the Dale County Central (was 2-13) site of Alabama Interoperable Radio System (AIRS). Its control channels are 770.16875, 770.41875, 772.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dale County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Dale County are marked encrypted.

Are Dale County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Dale County are marked encrypted.