About Echo Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Echo: Dale County Fire 453.2500 MHz, narrow FM, 131 DPL. Trunked: S and P Communications, for example Private EMS Providers talkgroup 801 (hex 321).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: S and P Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Echo, start with the Dale County Central (was 2-13) site of Alabama Interoperable Radio System (AIRS), about 12 miles away. Its control channels: 770.16875, 770.41875, 772.13125 MHz.
Data updated .
Dale County channels that also cover Echo
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dale County Fire | Rural Fire – Dispatch | 453.2500 In 458.2500 | 131 DPL | FMN | KNAU432 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dale County Hospital | Dale Medical Center – Patient Reports | 155.3400 | 71.9 PL | FMN | WQOL214 |
S and P Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Private EMS Providers | Haynes EMS – Dispatch | 801 | 321 | D |
| Private EMS Providers | Haynes EMS – Events | 802 | 322 | D |
Nearest trunked radio sites
Distances are measured from the center of Echo.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Echo?
We do not have a fire dispatch channel listed specifically for Echo. The county-level fire dispatch channels in the same county: Dale County Fire 453.2500 MHz, narrow FM, 131 DPL.
Do fire departments and EMS use a trunked radio system in Echo?
Yes. The county-level systems that cover Echo are Fire and EMS talkgroups are listed for S and P Communications: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Echo?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Echo?
For Echo, start with the Dale County Central (was 2-13) site of Alabama Interoperable Radio System (AIRS). Its control channels are 770.16875, 770.41875, 772.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.