Skip to content

Chilton County Fire and EMS Frequencies

Chilton County in Alabama has 5 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Chilton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Chilton County: Chilton County Fire 154.2950 MHz, narrow FM, 225.7 PL; Fairview Fire & Rescue 151.2650 MHz, narrow FM, no tone. Trunked: Alabama Interoperable Radio System (AIRS), for example Chilton County Fire talkgroup 40003 (hex 9c43).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Chilton County, start with the Maplesville site of Alabama Interoperable Radio System (AIRS). Its control channels: 769.25625 MHz.

Data updated .

Chilton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Chilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chilton County FireCounty Fire154.2950
In 156.1800
225.7 PLFMNWPCG702
Chilton County FireVolunteer Fire154.3250
In 153.9650
141.3 PLFMNKNEJ807
Chilton County FireVolunteer Fire154.3250
In 150.8050
141.3 PLFMNWPUF740
Fairview Fire & RescueFairview Fire & Rescue – Dispatch151.2650
In 159.2250
FMNWQGN634

Hospitals & Medical

Hospitals & Medical frequencies for Chilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chilton County HospitalChilton Medical Center – Patient Reports155.3400141.3 PLFMNWQOL250

Chilton County trunked talkgroups

Alabama Interoperable Radio System (AIRS)

System ID 00A

Alabama Interoperable Radio System (AIRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Chilton County FireChilton Fire – Dispatch400039c43D

Radio system sites in Chilton County

Program the control channel first; your scanner finds the voice channels from it.

Maplesville · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 33 (hex 21)
Control 769.25625
Voice 770.33125, 771.33125, 771.63125
Chilton County Simulcast · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 34 (hex 22)
Control 772.28125
Voice 772.73125, 773.48125, 774.13125, 774.45625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Chilton County

Common questions

What frequency does the fire department use in Chilton County?

Fire dispatch channels listed for Chilton County: Chilton County Fire 154.2950 MHz, narrow FM, 225.7 PL; Fairview Fire & Rescue 151.2650 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Chilton County?

Yes. Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Chilton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Chilton County?

For Chilton County, start with the Maplesville site of Alabama Interoperable Radio System (AIRS). Its control channels are 769.25625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Chilton County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Chilton County are marked encrypted.

Are Chilton County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Chilton County are marked encrypted.