Skip to content

Jemison Fire and EMS Frequencies

We do not have frequencies listed specifically for Jemison in Chilton County, Alabama yet. Countywide channels for Chilton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Chilton County Simulcast (Alabama Interoperable Radio System (AIRS)), about 14 miles away.

About Jemison Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jemison: Chilton County Fire 154.2950 MHz, narrow FM, 225.7 PL; Fairview Fire & Rescue 151.2650 MHz, narrow FM, no tone. Trunked: Alabama Interoperable Radio System (AIRS), for example Chilton County Fire talkgroup 40003 (hex 9c43).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jemison, start with the Chilton County Simulcast site of Alabama Interoperable Radio System (AIRS), about 14 miles away. Its control channels: 772.28125 MHz.

Data updated .

Chilton County channels that also cover Jemison

Fire Dispatch

Fire Dispatch frequencies for Chilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chilton County FireCounty Fire154.2950
In 156.1800
225.7 PLFMNWPCG702
Chilton County FireVolunteer Fire154.3250
In 153.9650
141.3 PLFMNKNEJ807
Chilton County FireVolunteer Fire154.3250
In 150.8050
141.3 PLFMNWPUF740
Fairview Fire & RescueFairview Fire & Rescue – Dispatch151.2650
In 159.2250
FMNWQGN634

Hospitals & Medical

Hospitals & Medical frequencies for Chilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chilton County HospitalChilton Medical Center – Patient Reports155.3400141.3 PLFMNWQOL250

Alabama Interoperable Radio System (AIRS)

System ID 00A

Alabama Interoperable Radio System (AIRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Chilton County FireChilton Fire – Dispatch400039c43D

Nearest trunked radio sites

Distances are measured from the center of Jemison.

Chilton County Simulcast · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 34 (hex 22) · about 14 mi away
Control 772.28125
Voice 772.73125, 773.48125, 774.13125, 774.45625
Maplesville · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 33 (hex 21) · about 16 mi away
Control 769.25625
Voice 770.33125, 771.33125, 771.63125
Shelby North Simulcast · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 3 (hex 3) · NAC 461 · about 22 mi away
Control 856.125, 856.6125, 857.0125, 857.15
Voice 854.2375, 854.6625, 854.8875, 855.3875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jemison?

We do not have a fire dispatch channel listed specifically for Jemison. The county-level fire dispatch channels in the same county: Chilton County Fire 154.2950 MHz, narrow FM, 225.7 PL; Fairview Fire & Rescue 151.2650 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Jemison?

Yes. The county-level systems that cover Jemison are Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jemison?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jemison?

For Jemison, start with the Chilton County Simulcast site of Alabama Interoperable Radio System (AIRS). Its control channels are 772.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.