Skip to content

Bullock County Fire and EMS Frequencies

Bullock County in Alabama has 0 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Bullock County Fire and EMS Frequencies

Quick answer: Trunked: Montgomery Metro Communications Cooperative District, for example Bullock County Fire talkgroup 780 (hex 30c).

  • Trunked radio systems that carry fire and EMS traffic here: Montgomery Metro Communications Cooperative District: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bullock County, start with the Union Springs site of Montgomery Metro Communications Cooperative District. Its control channels: 769.25625, 771.04375, 771.25625 MHz.

Data updated .

Bullock County trunked talkgroups

Montgomery Metro Communications Cooperative District

Montgomery Metro Communications Cooperative District talkgroups
AgencyDescriptionTalkgroupHexMode
Bullock County FireBullock County Fire – Dispatch (County)78030cD

Radio system sites in Bullock County

Program the control channel first; your scanner finds the voice channels from it.

Union Springs · Montgomery Metro Communications Cooperative District
RFSS 21 · Site 21 (hex 15)
Control 769.25625, 771.04375, 771.25625, 771.63125, 772.53125, 772.83125, 774.13125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bullock County

Common questions

Do fire departments and EMS use a trunked radio system in Bullock County?

Yes. Fire and EMS talkgroups are listed for Montgomery Metro Communications Cooperative District: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bullock County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bullock County?

For Bullock County, start with the Union Springs site of Montgomery Metro Communications Cooperative District. Its control channels are 769.25625, 771.04375, 771.25625, 771.63125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bullock County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Bullock County are marked encrypted.