Skip to content

Blount County Fire and EMS Frequencies

Blount County in Alabama has 3 countywide conventional frequencies and 9 countywide talkgroups in our database. Use the list of 27 cities and communities below for local fire departments and EMS agencies.

About Blount County Fire and EMS Frequencies

Quick answer: Fire dispatch for Blount County: Blount County Fire 158.8350 MHz, narrow FM, 186.2 PL. Trunked: Alabama Interoperable Radio System (AIRS), for example Blount County Fire talkgroup 43012 (hex a804).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Blount County, start with the Sky Ball Mountain site of Alabama Interoperable Radio System (AIRS). Its control channels: 851.55, 851.9125 MHz.

Data updated .

Blount County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County FireBlount County Fire – Dispatch
Patched to AIRS 43012
158.8350
In 154.0700
186.2 PLFMNKTI683

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County FireBlount County Fire – Fire Ground154.3550
In 153.8300
186.2 PLFMNWNRG833

Hospitals & Medical

Hospitals & Medical frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County HospitalBlount Medical Center – Patient Reports155.3400186.2 PLFMNWQOK958

Blount County trunked talkgroups

Alabama Interoperable Radio System (AIRS)

System ID 00A

Alabama Interoperable Radio System (AIRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Blount County FireBlount County Fire – Dispatch Primary-Countywide43012a804T
Blount County FireBlount County Fire – Dispatch Secondary-Countywide43013a805T
Blount County FireNorth Region Fire – Tactical43014a806T
Blount County FireEast Region Fire – Tactical43015a807T
Blount County FireSouth Region Fire – Tactical43016a808T
Blount County FireWest Region Fire – Tactical43017a809T
Blount County FireCountywide Fire – Tactical43018a80aT
Blount County FireCountywide Fire – Tactical43019a80bT
Blount County EMSLifeguard EMS – Dispatch (AMR)43037a81dT

Radio system sites in Blount County

Program the control channel first; your scanner finds the voice channels from it.

Sky Ball Mountain · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 35 (hex 23) · NAC 460
Control 851.55, 851.9125
Voice 851.175, 852.4125, 852.9125
Palisades Park · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 36 (hex 24) · NAC 460
Control 853.6375, 853.8875
Voice 852.4625, 852.9875, 853.3875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Blount County

Common questions

What frequency does the fire department use in Blount County?

Fire dispatch channels listed for Blount County: Blount County Fire 158.8350 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Blount County?

Yes. Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Blount County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Blount County?

For Blount County, start with the Sky Ball Mountain site of Alabama Interoperable Radio System (AIRS). Its control channels are 851.55, 851.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Blount County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Blount County are marked encrypted.

Are Blount County fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Blount County are marked encrypted.