Skip to content

Weston County Fire and EMS Frequencies

Weston County in Wyoming has 2 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Weston County Fire and EMS Frequencies

Quick answer: Fire dispatch for Weston County: Weston County Fire 155.7150 MHz, narrow FM, 156.7 PL. Trunked: WyoLink, for example Weston County Fire talkgroup 15502 (hex 3c8e).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Weston County, start with the Mount Pisgah site of WyoLink. Its control channels: 151.925, 156.15 MHz.

Data updated .

Weston County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Weston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Weston County FireWeston County Fire/EMS155.7150
In 155.1150
156.7 PLFMNWNGB569

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Weston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Weston County FireWeston County Fire151.2200FMNWQPL310

Weston County trunked talkgroups

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Weston County FireWeston County Fire – Dispatch155023c8eD
Weston County FireWeston County Fire – Fire Ground155033c8fD
Weston County FireWeston County Fire – Fire Ground155043c90D
Weston County FireWeston County Fire District155053c91D
Weston County FireFire Command155093c95D
Weston County FireSearch & Rescue155203ca0D
Weston County FireFire Administration155103c96D
Weston County EMSWeston County EMS – Dispatch155123c98D

Radio system sites in Weston County

Program the control channel first; your scanner finds the voice channels from it.

Mount Pisgah · WyoLink
RFSS 2 · Site 22 (hex 16) · NAC 1A9
Control 151.925, 156.15
Voice 150.8975, 150.9425, 151.0325, 151.475, 153.275, 169.9875, 170.3875, 171.3375
Newcastle · WyoLink
RFSS 2 · Site 36 (hex 24) · NAC 1A0
Control 154.1525, 154.2575, 154.3775
Voice 154.92, 155.4225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Weston County

Common questions

What frequency does the fire department use in Weston County?

Fire dispatch channels listed for Weston County: Weston County Fire 155.7150 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Weston County?

Yes. Fire and EMS talkgroups are listed for WyoLink: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Weston County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Weston County?

For Weston County, start with the Mount Pisgah site of WyoLink. Its control channels are 151.925, 156.15 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Weston County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Weston County are marked encrypted.

Are Weston County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Weston County are marked encrypted.