About Daniel Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Daniel: Sublette County Fire 151.1225 MHz, narrow FM, no tone. Trunked: WyoLink, for example Daniel Fire talkgroup 2010 (hex 7da).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 1 talkgroup; Sublette Interoperable Radio System (SIRS): 4 talkgroups; WyoLink: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Daniel, start with the Aspen Ridge site of WyoLink, about 14 miles away. Its control channels: 151.0175, 155.5425 MHz.
Data updated .
Daniel trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Daniel Fire | Daniel Fire | 2010 | 7da | D |
Sublette County channels that also cover Daniel
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sublette County Fire | Sublette County Unified Fire Paging (Hogsback Mountain) | 151.1225 | FMN | WRDA504 | |
| Sublette County Fire | Sublette County Unified Fire Paging (Kismet Peak) | 154.2575 | FMN | WRDA504 | |
| Sublette County Fire | Sublette County Unified Fire Paging (Marbleton, Sheriff's Office Office) | 154.3175 | FMN | WRDA504 | |
| Sublette County Fire | Sublette County Unified Fire Paging (Luman) | 155.4900 | FMN | WRCY853 | |
| Sublette County Fire | Sublette County Unified Fire Paging (White Pine Mountain) | 155.8725 | FMN | WRDA504 |
Sublette Interoperable Radio System (SIRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sublette Interoperable Radio System (SIRS) | Dispatch and Paging | 1001 | 3e9 | T |
| Sublette Interoperable Radio System (SIRS) | Sublette Interoperable Radio System (SIRS) – Tactical Channel | 4904 | 1328 | T |
| Sublette Interoperable Radio System (SIRS) | Fire Training | 1004 | 3ec | T |
| Sublette Interoperable Radio System (SIRS) | Dispatch and Paging | 3001 | bb9 | T |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sublette County Fire | County Fire | 2004 | 7d4 | D |
| Sublette County Fire | County Fire Tactical | 2005 | 7d5 | D |
| Sublette County Fire | County Fire Tactical | 2006 | 7d6 | D |
| Sublette County Fire | Pindale Fire | 2009 | 7d9 | D |
| Sublette County Fire | Kendall Valley Fire | 2014 | 7de | D |
| Sublette County Fire | Marbleton-Big Piney Fire | 2016 | 7e0 | D |
| Sublette County Fire | Search & Rescue | 2017 | 7e1 | D |
| Sublette County EMS | County EMS | 2007 | 7d7 | D |
| Sublette County EMS | County EMS | 2008 | 7d8 | D |
| Sublette County Hospital | Pinedale Medical Center | 2015 | 7df | D |
Nearest trunked radio sites
Distances are measured from the center of Daniel.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Daniel?
We do not have a fire dispatch channel listed specifically for Daniel. The county-level fire dispatch channels in the same county: Sublette County Fire 151.1225 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Daniel?
Yes. Fire and EMS talkgroups are listed for WyoLink: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Daniel?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Daniel?
For Daniel, start with the Aspen Ridge site of WyoLink. Its control channels are 151.0175, 155.5425 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Daniel fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Daniel are marked encrypted.