Skip to content

Mountain View Fire and EMS Frequencies

We do not have frequencies listed specifically for Mountain View in Natrona County, Wyoming yet. Countywide channels for Natrona County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Casper POE (WyoLink), about 3 miles away.

About Mountain View Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mountain View: Natrona County Fire 155.7450 MHz, narrow FM, no tone. Trunked: WyoLink, for example Natrona County Fire talkgroup 13148 (hex 335c).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 18 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mountain View, start with the Casper POE site of WyoLink, about 3 miles away. Its control channels: 150.805, 152.66 MHz.

Data updated .

Natrona County channels that also cover Mountain View

Fire Dispatch

Fire Dispatch frequencies for Natrona County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Natrona County FireRoad & Bridges/Fire-EMS Dispatch155.7450FMNWQAE493

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Natrona County FireNatrona County Fire – Dispatch13148335cD
Natrona County FireNatrona County Fire – Dispatch13149335dD
Natrona County FireNatrona County Fire District131853381D
Natrona County FireStation Alerting13215339fD
Natrona County FireCasper Mountan Fire131233343D
Natrona County FireNatrona County Fire – Tactical Channel13150335eD
Natrona County FireNatrona County Fire – Tactical Channel13151335fD
Natrona County FireNatrona County Fire – Tactical Channel131523360D
Natrona County FireNatrona County Fire – Tactical Channel131533361D
Natrona County FireNatrona County Fire – Tactical Channel131543362D
Natrona County FireNatrona County Fire – Tactical Channel131553363D
Natrona County FireNatrona County Fire – Tactical Channel1322433a8D
Natrona County FireNatrona County Fire – Tactical Channel1322533a9D
Natrona County FireNatrona County Fire – Tactical Channel1322633aaD
Natrona County FireNatrona County Fire – Tactical Channel1322733abD
Natrona County FireNatrona County Fire – Tactical Channel1322833acD
Natrona County FireNatrona County Fire – Tactical Channel1322933adD
Natrona County HospitalWyoming Medical Center – Mesa Primary Care1325033c2D

Nearest trunked radio sites

Distances are measured from the center of Mountain View.

Casper POE · WyoLink
RFSS 2 · Site 1 (hex 1) · NAC 1A9 · about 3 mi away
Control 150.805, 152.66
Voice 150.9725, 152.57, 153.9125
Casper Mountain 800 · WyoLink
RFSS 2 · Site 28 (hex 1C) · NAC 1A0 · about 10 mi away
Control 854.9875, 855.9875, 858.7125, 859.2125
Voice 855.2125, 855.7125, 856.2125, 856.7125, 857.2125, 857.7125, 858.2125, 859.7125
Casper Mountain VHF · WyoLink
RFSS 2 · Site 5 (hex 5) · NAC 1A0 · about 11 mi away
Control 152.51, 154.2125
Voice 152.57, 152.66, 153.815, 154.6875, 155.25, 156.18, 171.5375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mountain View?

We do not have a fire dispatch channel listed specifically for Mountain View. The county-level fire dispatch channels in the same county: Natrona County Fire 155.7450 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Mountain View?

Yes. The county-level systems that cover Mountain View are Fire and EMS talkgroups are listed for WyoLink: 18 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mountain View?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Mountain View?

For Mountain View, start with the Casper POE site of WyoLink. Its control channels are 150.805, 152.66 MHz. Program a control channel first; the scanner finds the voice channels from it.