About Kaycee Fire and EMS Frequencies
Quick answer: Fire dispatch for Kaycee: Kaycee Fire 154.4300 MHz, narrow FM, 114.8 PL. Trunked: WyoLink, for example Johnson County Fire talkgroup 14711 (hex 3977).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kaycee, start with the Tisdale Mountain site of WyoLink, about 3 miles away. Its control channels: 151.4075, 154.1225 MHz.
Data updated .
Kaycee conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kaycee Fire | Powder River Fire District | 154.4300 In 158.8350 | 114.8 PL | FMN | WQCK426 |
Johnson County channels that also cover Kaycee
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnson County Fire | Johnson County Fire | 154.3250 In 158.9700 | 114.8 PL | FMN | WQBD537 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnson County Fire | Johnson County Search & Rescue | 155.1600 | 114.8 PL | FMN | WNPY541 |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Johnson County Fire | Johnson County Fire – Tactical Channel | 14711 | 3977 | D |
| Johnson County Fire | Johnson County Fire – Tactical Channel | 14712 | 3978 | D |
| Johnson County Fire | Johnson County Fire District 1 | 14709 | 3975 | D |
| Johnson County Fire | Powder River Fire District 1 | 14710 | 3976 | D |
| Johnson County EMS | Johnson County EMS – Dispatch | 14713 | 3979 | D |
| Johnson County Hospital | Johnson County Memorial Hospital | 14714 | 397a | D |
Nearest trunked radio sites
Distances are measured from the center of Kaycee.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kaycee?
Fire dispatch channels listed for Kaycee: Kaycee Fire 154.4300 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Kaycee?
Yes. The county-level systems that cover Kaycee are Fire and EMS talkgroups are listed for WyoLink: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kaycee?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kaycee?
For Kaycee, start with the Tisdale Mountain site of WyoLink. Its control channels are 151.4075, 154.1225 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kaycee fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Kaycee are marked encrypted.