Skip to content

Buffalo Fire and EMS Frequencies

Buffalo in Johnson County, Wyoming has 1 conventional frequency and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Buffalo (WyoLink), about 2 miles away.

About Buffalo Fire and EMS Frequencies

Quick answer: Fire dispatch for Buffalo: Buffalo Fire 155.2200 MHz, narrow FM, 97.4 PL. Trunked: WyoLink, for example Buffalo Fire talkgroup 14707 (hex 3973).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WyoLink: 2 talkgroups; WyoLink: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Buffalo, start with the Buffalo site of WyoLink, about 2 miles away. Its control channels: 154.16, 154.235 MHz.

Data updated .

Buffalo conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Buffalo
AgencyDescriptionFrequency (MHz)ToneModeFCC
Buffalo FireBuffalo Fire155.2200
In 159.1350
97.4 PLFMNWNEA276

Buffalo trunked talkgroups

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Buffalo FireBuffalo Fire – Dispatch147073973D
Buffalo FireBuffalo Fire – Fire Ground147083974D

Johnson County channels that also cover Buffalo

Fire Dispatch

Fire Dispatch frequencies for Johnson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnson County FireJohnson County Fire154.3250
In 158.9700
114.8 PLFMNWQBD537

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Johnson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnson County FireJohnson County Search & Rescue155.1600114.8 PLFMNWNPY541

WyoLink

WyoLink talkgroups
AgencyDescriptionTalkgroupHexMode
Johnson County FireJohnson County Fire – Tactical Channel147113977D
Johnson County FireJohnson County Fire – Tactical Channel147123978D
Johnson County FireJohnson County Fire District 1147093975D
Johnson County FirePowder River Fire District 1147103976D
Johnson County EMSJohnson County EMS – Dispatch147133979D
Johnson County HospitalJohnson County Memorial Hospital14714397aD

Nearest trunked radio sites

Distances are measured from the center of Buffalo.

Buffalo · WyoLink
RFSS 2 · Site 34 (hex 22) · NAC 1A0 · about 2 mi away
Control 154.16, 154.235
Voice 154.355, 154.8225, 154.905
Tisdale Divide · WyoLink
RFSS 2 · Site 15 (hex F) · NAC 1A9 · about 7 mi away
Control 151.19, 151.3925
Voice 151.0475, 151.22, 153.905
Banner Ridge · WyoLink
RFSS 2 · Site 14 (hex E) · NAC 1A9 · about 21 mi away
Control 152.54, 152.63
Voice 150.9725, 154.25, 154.92
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Buffalo?

Fire dispatch channels listed for Buffalo: Buffalo Fire 155.2200 MHz, narrow FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Buffalo?

Yes. Fire and EMS talkgroups are listed for WyoLink: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Buffalo?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Buffalo?

For Buffalo, start with the Buffalo site of WyoLink. Its control channels are 154.16, 154.235 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Buffalo fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Buffalo are marked encrypted.

Are Buffalo fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Buffalo are marked encrypted.