Skip to content

Crook County Fire and EMS Frequencies

Crook County in Wyoming has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Crook County Fire and EMS Frequencies

Quick answer: Fire dispatch for Crook County: Crook County Fire 154.3250 MHz, narrow FM, 107.2 PL. EMS dispatch for Crook County: Crook County EMS 156.1650 MHz, narrow FM, 94.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Crook County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crook County FireCrook County Fire/EMS154.3250
In 154.0100
107.2 PLFMNWNUI266

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Crook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crook County FireCrook County – Pine Haven Fire154.1750FMNWPXR843

EMS Dispatch

EMS Dispatch frequencies for Crook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crook County EMSCrook County EMS156.1650
In 159.0450
94.8 PLFMNWPYF338

Radio system sites in Crook County

Program the control channel first; your scanner finds the voice channels from it.

Warren Peak · WyoLink
RFSS 2 · Site 21 (hex 15) · NAC 1A9
Control 153.6575, 169.65
Voice 170.025, 170.8125, 172.1375
Alva · WyoLink
RFSS 2 · Site 47 (hex 2F) · NAC 1A0
Control 155.7075, 155.7975
Voice 155.8875, 155.9625, 156.195
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Crook County

Common questions

What frequency does the fire department use in Crook County?

Fire dispatch channels listed for Crook County: Crook County Fire 154.3250 MHz, narrow FM, 107.2 PL.

What frequency does EMS or the ambulance service use in Crook County?

EMS dispatch channels listed for Crook County: Crook County EMS 156.1650 MHz, narrow FM, 94.8 PL.

What scanner do I need to listen to fire and EMS in Crook County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Crook County?

For Crook County, start with the Warren Peak site of WyoLink. Its control channels are 153.6575, 169.65 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crook County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Crook County are marked encrypted.