About Shell Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Shell: Big Horn County Fire 155.0625 MHz, narrow FM, 100.0 PL. Trunked: WyoLink, for example Shell Fire talkgroup 13520 (hex 34d0).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 1 talkgroup; WyoLink: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Shell, start with the Torch Hill site of WyoLink, about 15 miles away. Its control channels: 154.025, 154.3625 MHz.
Data updated .
Shell trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Shell Fire | Shell Fire – Dispatch | 13520 | 34d0 | D |
Big Horn County channels that also cover Shell
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Horn County Fire | Big Horn County Fire District 5 | 155.0625 In 151.4975 | 100.0 PL | FMN | WQJQ419 |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Big Horn County Fire | Fire and EMS Paging | 20117 | 4e95 | D |
| Big Horn County Fire | Search & Rescue South | 13515 | 34cb | D |
| Big Horn County Fire | Search & Rescue North | 13516 | 34cc | D |
| Big Horn County Fire | Big Horn County Fire – Tactical Channel | 13523 | 34d3 | D |
| Big Horn County Fire | Big Horn County Fire – Tactical Channel | 13524 | 34d4 | D |
| Big Horn County EMS | Big Horn County EMS – Dispatch | 13525 | 34d5 | D |
| Big Horn County EMS | Big Horn County EMS – Tactical Channel | 13529 | 34d9 | D |
Nearest trunked radio sites
Distances are measured from the center of Shell.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Shell?
We do not have a fire dispatch channel listed specifically for Shell. The county-level fire dispatch channels in the same county: Big Horn County Fire 155.0625 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Shell?
Yes. Fire and EMS talkgroups are listed for WyoLink: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Shell?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Shell?
For Shell, start with the Torch Hill site of WyoLink. Its control channels are 154.025, 154.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Shell fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Shell are marked encrypted.