About Albany County Fire and EMS Frequencies
Quick answer: Fire dispatch for Albany County: Albany County Fire 155.1150 MHz, narrow FM, no tone. Trunked: WyoLink, for example Albany County Fire talkgroup 600 (hex 258).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Albany County, start with the Sherman Hill site of WyoLink. Its control channels: 155.07, 155.19, 155.5875 MHz.
Data updated .
Albany County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Albany County Fire | Albany County Fire/EMS Dispatch/Paging | 155.1150 | FMN | WPCH751 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Albany County Fire | Albany County Fireground | 154.3100 | FMN | — |
Albany County trunked talkgroups
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Albany County Fire | Albany County Fire – Dispatch | 600 | 258 | D |
| Albany County Fire | Albany County Fire – Fire Ground | 601 | 259 | D |
| Albany County Fire | Albany County Fire – Fire Ground | 602 | 25a | D |
| Albany County Fire | Albany County Fire – Fire Ground | 603 | 25b | D |
| Albany County Fire | Albany County Fire – Fire Ground | 604 | 25c | D |
| Albany County Fire | Fire All Call | 605 | 25d | D |
| Albany County Fire | North | 609 | 261 | D |
| Albany County Fire | Vedauwoo Fire | 630 | 276 | D |
| Albany County Fire | Little Laramie Valley Fire Department | 631 | 277 | D |
| Albany County Fire | Centennial Valley Fire Department | 633 | 279 | D |
| Albany County Fire | Tie Siding Fire | 634 | 27a | D |
| Albany County Fire | Big Laramie Fire Department | 635 | 27b | D |
| Albany County Fire | Sybille Fire Zone | 636 | 27c | D |
| Albany County Fire | Garrett Fire Zone | 637 | 27d | D |
| Albany County Fire | Laramie Peak Fire Zone | 638 | 27e | D |
| Albany County EMS | Albany County EMS – Dispatch | 608 | 260 | D |
Radio system sites in Albany County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Albany County
Common questions
What frequency does the fire department use in Albany County?
Fire dispatch channels listed for Albany County: Albany County Fire 155.1150 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Albany County?
Yes. Fire and EMS talkgroups are listed for WyoLink: 16 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Albany County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Albany County?
For Albany County, start with the Sherman Hill site of WyoLink. Its control channels are 155.07, 155.19, 155.5875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Albany County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Albany County are marked encrypted.
Are Albany County fire and EMS talkgroups encrypted?
None of the 16 talkgroups listed for Albany County are marked encrypted.