Skip to content

Washington County Fire and EMS Frequencies

Washington County in Wisconsin has 4 countywide conventional frequencies and 20 countywide talkgroups in our database. Use the list of 17 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 158.8350 MHz, narrow FM, CSQ. Trunked: Washington County, for example Washington County Fire talkgroup 57516 (hex e0ac).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Washington County: 19 talkgroups; WISCOM: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington County, start with the VHF Simulcast site of Washington County. Its control channels: 151.1, 151.235, 154.19 MHz.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireFire/EMS Paging158.8350CSQFMNKQN708

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Fire Ground154.0100192.8 PLFMNWPLZ508

EMS Talk-around

EMS Talk-around frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County EMSFroedtert Health St Joseph's Hospital155.340094.8 PLFMNKVM354
Washington County EMSAurora Medical Center Patient Reports155.3400167.9 PLFMNKTV682

Washington County trunked talkgroups

Washington County

System ID 29E

Washington County talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireCounty Fire Dispatch57516e0acD
Washington County FireCounty Fire Paging57517e0adD
Washington County FireCounty Fire Paging57530e0baD
Boltonville FireBoltonville Fire Command57670e146D
Boltonville FireBoltonville Fire Tactical57671e147D
Boltonville FireBoltonville Fire Tactical57672e148D
Boltonville FireBoltonville Fire Water/Tender Operations57673e149D
Boltonville FireBoltonville Fire Special Events57674e14aD
Fillmore FireFillmore Fire Command57680e150D
Fillmore FireFillmore Fire Tactical57681e151D
Fillmore FireFillmore Fire Tactical57682e152D
Fillmore FireFillmore Fire Water/Tender Operations57683e153D
Kohlsville FireKohlsville Fire Command57730e182D
Kohlsville FireKohlsville Fire Tactical57731e183D
Kohlsville FireKohlsville Fire Tactical57732e184D
Kohlsville FireKohlsville Fire Water/Tender Operations57733e185D
Washington County FireCounty Fire Tactical57503e09fD
Washington County FireCounty Fire Tactical57504e0a0D
Lifestar EMSLifestar EMS Dispatch57774e1aeD

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County EMSLifestar EMS57774e1aeD

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

VHF Simulcast · Washington County
RFSS 1 · Site 1 (hex 1) · NAC 29E
Control 151.1, 151.235, 154.19, 154.74, 154.965, 154.9875, 155.25, 155.43, 155.535, 155.76
Simulcast · Washington County
RFSS 10 · Site 10 (hex A) · NAC 29E
Control 770.25625, 770.83125, 771.25625, 771.78125, 772.13125, 772.43125, 772.70625, 772.98125
700 MHz Simulcast · Washington County
RFSS 14 · Site 14 (hex E) · NAC 670
Control 770.25625, 770.83125, 771.25625, 771.78125, 772.13125
Germantown 700 · WISCOM
RFSS 1 · Site 246 (hex F6) · NAC B02
Control 773.06875, 774.06875
Voice 773.31875, 774.31875, 774.56875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 158.8350 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Washington County?

Yes. Fire and EMS talkgroups are listed for Washington County: 19 talkgroups; WISCOM: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the VHF Simulcast site of Washington County. Its control channels are 151.1, 151.235, 154.19, 154.74 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Washington County are marked encrypted.

Are Washington County fire and EMS talkgroups encrypted?

None of the 20 talkgroups listed for Washington County are marked encrypted.