Skip to content

Conover Fire and EMS Frequencies

We do not have frequencies listed specifically for Conover in Vilas County, Wisconsin yet. Countywide channels for Vilas County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phelps (WISCOM), about 9 miles away.

About Conover Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Conover: County Safety/Service 154.4150 MHz, narrow FM, 118.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Vilas County channels that also cover Conover

Fire Dispatch

Fire Dispatch frequencies for Vilas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceFire/EMS Dispatch154.4150
In 153.7700
118.8 PLFMNWYK459

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Vilas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceHeadwaters Search & Rescue Dog Assn151.5050
In 158.4000
FMNWQOY963
County Safety/ServiceHeadwaters Search & Rescue Dog Assn152.3000
In 157.5600
FMNWQOY963
County Safety/ServiceHeadwaters Search & Rescue Dog Assn155.2650FMNKB20482
County Safety/ServiceCounty Safety/Service – Tactical Channel155.8800
In 158.8800
118.8 PLFMNKNHU668

Hospitals & Medical

Hospitals & Medical frequencies for Vilas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceEMS to Eagle River Memorial Hospital155.3400118.8 PLFMNKVD512

Nearest trunked radio sites

Distances are measured from the center of Conover.

Phelps · WISCOM
RFSS 1 · Site 26 (hex 1A) · NAC B09 · about 9 mi away
Control 152.6375, 155.565, 155.9475
Voice 151.04, 154.875
Clear Lake · WISCOM
RFSS 1 · Site 111 (hex 6F) · NAC B04 · about 19 mi away
Control 139.3625, 151.265
Voice 151.475, 154.235, 154.845
Boulder Junction · WISCOM
RFSS 1 · Site 103 (hex 67) · NAC B03 · about 21 mi away
Control 152.0225, 152.1725, 152.6975
Voice 151.22, 154.2275
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Conover?

We do not have a fire dispatch channel listed specifically for Conover. The county-level fire dispatch channels in the same county: County Safety/Service 154.4150 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Conover?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Conover?

For Conover, start with the Phelps site of WISCOM. Its control channels are 152.6375, 155.565, 155.9475 MHz. Program a control channel first; the scanner finds the voice channels from it.