Skip to content

Sheldon Fire and EMS Frequencies

We do not have frequencies listed specifically for Sheldon in Rusk County, Wisconsin yet. Countywide channels for Rusk County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Holcombe (WISCOM), about 13 miles away.

About Sheldon Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sheldon: Rusk County Fire 154.2050 MHz, narrow FM, 118.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Rusk County channels that also cover Sheldon

Fire Dispatch

Fire Dispatch frequencies for Rusk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rusk County FireRusk County Fire – Dispatch154.2050
In 158.8950
118.8 PLFMNKNAO343

Nearest trunked radio sites

Distances are measured from the center of Sheldon.

Holcombe · WISCOM
RFSS 1 · Site 53 (hex 35) · NAC B0C · about 13 mi away
Control 139.0125, 151.265, 152.7425
Voice 155.385, 155.58
Perkinstown · WISCOM
RFSS 1 · Site 110 (hex 6E) · NAC B07 · about 18 mi away
Control 139.4125, 152.0375, 152.2025
Voice 154.415, 155.655
Bellinger · WISCOM
RFSS 1 · Site 162 (hex A2) · NAC B03 · about 18 mi away
Control 151.0775, 151.3325, 154.665, 155.7075
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sheldon?

We do not have a fire dispatch channel listed specifically for Sheldon. The county-level fire dispatch channels in the same county: Rusk County Fire 154.2050 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Sheldon?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sheldon?

For Sheldon, start with the Holcombe site of WISCOM. Its control channels are 139.0125, 151.265, 152.7425 MHz. Program a control channel first; the scanner finds the voice channels from it.