Skip to content

Polk County Fire and EMS Frequencies

Polk County in Wisconsin has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Polk County Fire and EMS Frequencies

Quick answer: Fire dispatch for Polk County: Polk County Fire 154.0250 MHz, narrow FM, 179.9 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Polk County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County FireFire/EMS Paging154.0250
In 156.0150
179.9 PLFMNWQFA852

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County FirePolk County Fire – Fire Ground154.2350179.9 PLFMNWQJ485

Fire Talk-around

Fire Talk-around frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County FireFire/EMS Talk154.8000
In 159.1050
179.9 PLFMNWQFA852

Hospitals & Medical

Hospitals & Medical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HospitalsAmery Regional Medical lCenter155.3400131.8 PLFMNWPWG322
HospitalsOsceola Medical Center155.340091.5 PLFMNKYI877
HospitalsSt. Croix Regional Medical Center155.3400203.5 PLFMNWNKT925

Radio system sites in Polk County

Program the control channel first; your scanner finds the voice channels from it.

Frederic · WISCOM
RFSS 1 · Site 60 (hex 3C) · NAC B00
Control 139.0875, 152.0375, 152.1425
Voice 152.8025, 155.685
Dresser · WISCOM
RFSS 1 · Site 82 (hex 52) · NAC b0c
Control 139.1125, 151.115, 152.2175
Voice 154.665, 155.505
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Polk County

Common questions

What frequency does the fire department use in Polk County?

Fire dispatch channels listed for Polk County: Polk County Fire 154.0250 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to fire and EMS in Polk County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Polk County?

For Polk County, start with the Frederic site of WISCOM. Its control channels are 139.0875, 152.0375, 152.1425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Polk County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Polk County are marked encrypted.