Skip to content

Riverview Fire and EMS Frequencies

We do not have frequencies listed specifically for Riverview in Oconto County, Wisconsin yet. Countywide channels for Oconto County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lakewood (WISCOM), about 12 miles away.

About Riverview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Riverview: Oconto County Fire 151.2500 MHz, narrow FM, 107.2 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Oconto County channels that also cover Riverview

Fire Dispatch

Fire Dispatch frequencies for Oconto County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oconto County FireFire/EMS Paging151.2500
In 153.8600
107.2 PLFMNWQCI412

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Oconto County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oconto County FireOconto County Fire – Fire Ground154.2350179.9 PLFMNWQNQ312
Oconto County FireFire/EMS Tactical155.4300
In 158.8500
97.4 PLFMNWQCI412
Oconto County FireFire/EMS Tactical155.5800
In 156.1950
91.5 PLFMNWQCI412
Oconto County FireFire/EMS Tactical155.8425
In 159.4200
88.5 PLFMNWRYM244

Nearest trunked radio sites

Distances are measured from the center of Riverview.

Lakewood · WISCOM
RFSS 1 · Site 30 (hex 1E) · NAC B0C · about 12 mi away
Control 139.3125, 140.3625, 152.5925
Voice 151.325, 155.67
Kent · WISCOM
RFSS 1 · Site 107 (hex 6B) · NAC B0B · about 23 mi away
Control 139.8125, 152.0225, 152.1425
Voice 155.46, 155.955
Marinette · WISCOM
RFSS 1 · Site 32 (hex 20) · NAC B00 · about 28 mi away
Control 139.3625, 139.6625, 152.5475
Voice 151.01, 151.265
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Riverview?

We do not have a fire dispatch channel listed specifically for Riverview. The county-level fire dispatch channels in the same county: Oconto County Fire 151.2500 MHz, narrow FM, 107.2 PL.

What scanner do I need to listen to fire and EMS in Riverview?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Riverview?

For Riverview, start with the Lakewood site of WISCOM. Its control channels are 139.3125, 140.3625, 152.5925 MHz. Program a control channel first; the scanner finds the voice channels from it.