Skip to content

Bevent Fire and EMS Frequencies

We do not have frequencies listed specifically for Bevent in Marathon County, Wisconsin yet. Countywide channels for Marathon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Plover (WISCOM), about 18 miles away.

About Bevent Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bevent: County Safety/Service 154.3400 MHz, narrow FM, 167.9 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Marathon County channels that also cover Bevent

Fire Dispatch

Fire Dispatch frequencies for Marathon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceFire/EMS Paging154.3400167.9 PLFMNWNMT270
County Safety/ServiceCounty Safety/Service – Dispatch154.9650
In 153.7700
186.2 PLFMNWNMT270

Hospitals & Medical

Hospitals & Medical frequencies for Marathon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceEMS to Wausau Hospital155.3400167.9 PLFMNWPZI870
County Safety/ServiceEMS to Marshfield Medical Center Weston155.3400179.9 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Bevent.

Plover · WISCOM
RFSS 1 · Site 112 (hex 70) · NAC B07 · about 18 mi away
Control 152.0525, 152.5325, 154.8225
Voice 151.265, 155.385
Rib Mountain · WISCOM
RFSS 1 · Site 34 (hex 22) · NAC B0A · about 19 mi away
Control 139.7625, 152.5175, 152.6225
Voice 152.0675, 152.84, 155.265
Wittenberg · WISCOM
RFSS 1 · Site 33 (hex 21) · NAC B06 · about 19 mi away
Control 139.6125, 140.4125, 152.1575
Voice 151.34, 154.6875, 155.625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bevent?

We do not have a fire dispatch channel listed specifically for Bevent. The county-level fire dispatch channels in the same county: County Safety/Service 154.3400 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Bevent?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bevent?

For Bevent, start with the Plover site of WISCOM. Its control channels are 152.0525, 152.5325, 154.8225 MHz. Program a control channel first; the scanner finds the voice channels from it.