Skip to content

Bern Fire and EMS Frequencies

We do not have frequencies listed specifically for Bern in Marathon County, Wisconsin yet. Countywide channels for Marathon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Medford (WISCOM), about 11 miles away.

About Bern Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bern: County Safety/Service 154.3400 MHz, narrow FM, 167.9 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Marathon County channels that also cover Bern

Fire Dispatch

Fire Dispatch frequencies for Marathon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceFire/EMS Paging154.3400167.9 PLFMNWNMT270
County Safety/ServiceCounty Safety/Service – Dispatch154.9650
In 153.7700
186.2 PLFMNWNMT270

Hospitals & Medical

Hospitals & Medical frequencies for Marathon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Safety/ServiceEMS to Wausau Hospital155.3400167.9 PLFMNWPZI870
County Safety/ServiceEMS to Marshfield Medical Center Weston155.3400179.9 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Bern.

Medford · WISCOM
RFSS 1 · Site 161 (hex A1) · NAC B06 · about 11 mi away
Control 151.2275, 154.025, 154.785, 155.925
Westboro · WISCOM
RFSS 1 · Site 163 (hex A3) · NAC B05 · about 19 mi away
Control 155.175, 155.355, 155.67
Voice 154.875
Unity · WISCOM
RFSS 1 · Site 96 (hex 60) · NAC B07 · about 20 mi away
Control 139.0875, 152.0225, 152.1425, 152.6375
Voice 152.5475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bern?

We do not have a fire dispatch channel listed specifically for Bern. The county-level fire dispatch channels in the same county: County Safety/Service 154.3400 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Bern?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bern?

For Bern, start with the Medford site of WISCOM. Its control channels are 151.2275, 154.025, 154.785, 155.925 MHz. Program a control channel first; the scanner finds the voice channels from it.