About Juneau County Fire and EMS Frequencies
Quick answer: Fire dispatch for Juneau County: Juneau County Fire 154.1900 MHz, narrow FM, 82.5 PL. Trunked: WISCOM, for example Juneau County Fire talkgroup 29005 (hex 714d).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WISCOM: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Juneau County, start with the Juneau Co Simulcast site of WISCOM. Its control channels: 152.66, 152.7725, 155.505 MHz.
Data updated .
Juneau County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Juneau County Fire | Fire Paging | 154.1900 In 155.9850 | 82.5 PL | FMN | WNMX669 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Juneau County Fire | Juneau County Fire – Fire Ground | 153.9500 | 82.5 PL | FMN | WNMX669 |
Juneau County trunked talkgroups
WISCOM
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Juneau County Fire | Juneau County Paging (patch to 154.190) | 29005 | 714d | D |
| Juneau County Fire | Juneau County Fire | 29007 | 714f | D |
| Juneau County Fire | Juneau County Fire | 29008 | 7150 | D |
| Juneau County EMS | Juneau County EMS | 29006 | 714e | D |
Radio system sites in Juneau County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Juneau County
Common questions
What frequency does the fire department use in Juneau County?
Fire dispatch channels listed for Juneau County: Juneau County Fire 154.1900 MHz, narrow FM, 82.5 PL.
Do fire departments and EMS use a trunked radio system in Juneau County?
Yes. Fire and EMS talkgroups are listed for WISCOM: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Juneau County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Juneau County?
For Juneau County, start with the Juneau Co Simulcast site of WISCOM. Its control channels are 152.66, 152.7725, 155.505 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Juneau County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Juneau County are marked encrypted.
Are Juneau County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Juneau County are marked encrypted.