Skip to content

Bear Bluff Fire and EMS Frequencies

We do not have frequencies listed specifically for Bear Bluff in Jackson County, Wisconsin yet. Countywide channels for Jackson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Necedah (WISCOM), about 18 miles away.

About Bear Bluff Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bear Bluff: Jackson County Fire 151.1225 MHz, narrow FM, 123.0 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jackson County channels that also cover Bear Bluff

Fire Dispatch

Fire Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County FireCounty Fire at Taylor151.1225123.0 PLFMNWQUC267
Jackson County FireJackson County Fire – Dispatch154.4450
In 153.8900
123.0 PLFMNKJW440

Hospitals & Medical

Hospitals & Medical frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County HospitalEMS to Black River Memorial Hospital155.3400162.2 PLFMNKTP841

Nearest trunked radio sites

Distances are measured from the center of Bear Bluff.

Necedah · WISCOM
RFSS 1 · Site 130 (hex 82) · NAC B0C · about 18 mi away
Control 169.8125, 172.6125, 172.775
Voice 156.21
Cary Mound · WISCOM
RFSS 1 · Site 25 (hex 19) · NAC B0F · about 23 mi away
Control 139.2625, 152.1725, 152.6525
Voice 151.475, 152.8025
Juneau Co Simulcast · WISCOM
RFSS 1 · Site 129 (hex 81) · NAC B02 · about 24 mi away
Control 152.66, 152.7725, 155.505
Voice 151.37, 154.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bear Bluff?

We do not have a fire dispatch channel listed specifically for Bear Bluff. The county-level fire dispatch channels in the same county: Jackson County Fire 151.1225 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Bear Bluff?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Bear Bluff?

For Bear Bluff, start with the Necedah site of WISCOM. Its control channels are 169.8125, 172.6125, 172.775 MHz. Program a control channel first; the scanner finds the voice channels from it.