Skip to content

Iron County Fire and EMS Frequencies

Iron County in Wisconsin has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 13 cities and communities below for local fire departments and EMS agencies.

About Iron County Fire and EMS Frequencies

Quick answer: Fire dispatch for Iron County: Iron County Fire 155.9550 MHz, narrow FM, 123.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Iron County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iron County FireIron County Fire – North (123.0 in)155.9550
In 158.9250
123.0 PLFMNWPQI677
Iron County FireIron County Fire – South (100.0 in)155.9550
In 158.9250
123.0 PLFMNWPQI677
Iron County FireIron County Fire – West (110.9 in)155.9550
In 158.9250
123.0 PLFMNWPQI677

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iron County FireIron County Fire – Fire Ground154.0925
In 155.8425
261 DPLFMNWPQI677

Fire Talk-around

Fire Talk-around frequencies for Iron County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iron County FireIron County Fire – Fire Ground154.1600123.0 PLFMN—

Radio system sites in Iron County

Program the control channel first; your scanner finds the voice channels from it.

Mercer · WISCOM
RFSS 1 · Site 64 (hex 40) · NAC B09
Control 139.2625, 139.6625, 151.385
Voice 154.755, 155.025
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Iron County

Common questions

What frequency does the fire department use in Iron County?

Fire dispatch channels listed for Iron County: Iron County Fire 155.9550 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Iron County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Iron County?

For Iron County, start with the Mercer site of WISCOM. Its control channels are 139.2625, 139.6625, 151.385 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Iron County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Iron County are marked encrypted.