Skip to content

Green County Fire and EMS Frequencies

Green County in Wisconsin has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 21 cities and communities below for local fire departments and EMS agencies.

About Green County Fire and EMS Frequencies

Quick answer: Fire dispatch for Green County: Green County Fire 154.1600 MHz, P25, NAC 232. EMS dispatch for Green County: Green County EMS 156.2175 MHz, P25, NAC 233.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Green County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Green County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Green County FireGreen County Fire – Dispatch154.1600
In 156.0450
NAC 232P25WNDC726
Green County FireEMS/Fire Paging163.250091.5 PLFMNWQL990

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Green County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Green County FireGreen County Fire – Fire Ground154.3550123.0 PLFMNWNDC726

EMS Dispatch

EMS Dispatch frequencies for Green County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Green County EMSGreen County EMS – Dispatch156.2175NAC 233P25KSB392

EMS Talk-around

EMS Talk-around frequencies for Green County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Green County EMSGreen County EMS – Alternate153.3050100.0 PLFMNWQFW978

Hospitals & Medical

Hospitals & Medical frequencies for Green County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Green County HospitalEMS to Monroe Clinic and Hospital155.3400114.8 PLFMNWQCK969

Radio system sites in Green County

Program the control channel first; your scanner finds the voice channels from it.

Monticello · WISCOM
RFSS 1 · Site 18 (hex 12) · NAC B0E
Control 139.1625, 152.0375, 152.7425
Voice 153.5375, 154.935
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Green County

Common questions

What frequency does the fire department use in Green County?

Fire dispatch channels listed for Green County: Green County Fire 154.1600 MHz, P25, NAC 232.

What frequency does EMS or the ambulance service use in Green County?

EMS dispatch channels listed for Green County: Green County EMS 156.2175 MHz, P25, NAC 233.

What scanner do I need to listen to fire and EMS in Green County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Green County?

For Green County, start with the Monticello site of WISCOM. Its control channels are 139.1625, 152.0375, 152.7425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Green County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Green County are marked encrypted.