Skip to content

Dunn County Fire and EMS Frequencies

Dunn County in Wisconsin has 4 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Dunn County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dunn County: Dunn County Fire 158.7750 MHz, narrow FM, 91.5 PL. Trunked: WISCOM, for example Dunn County Fire talkgroup 17007 (hex 426f).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dunn County, start with the Elmwood site of WISCOM. Its control channels: 139.1625, 152.1425, 152.6525 MHz.

Data updated .

Dunn County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dunn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dunn County FireDunn County Fire – Dispatch158.7750
In 153.8000
91.5 PLFMNWPXQ362

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dunn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rural AgenciesElk Mound Fire Department Fireground154.1450FMNWQDB913

Hospitals & Medical

Hospitals & Medical frequencies for Dunn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support and FacilitiesEMS to Myrtle Werth Medical Center (BLS)155.3400100.0 PLFMNWRG693
Medical Support and FacilitiesEMS to Myrtle Werth Medical Center (ALS)155.4000100.0 PLFMNWRG693

Dunn County trunked talkgroups

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Dunn County FireDunn County Fire17007426fD
Dunn County FireDunn County Fire170084270D

Radio system sites in Dunn County

Program the control channel first; your scanner finds the voice channels from it.

Elmwood · WISCOM
RFSS 1 · Site 51 (hex 33) · NAC b04
Control 139.1625, 152.1425, 152.6525
Voice 151.22, 151.475
Menomonie · WISCOM
RFSS 1 · Site 133 (hex 85) · NAC B0C
Control 151.3175, 153.695
Voice 153.05, 154.695, 155.445
Rock Falls · WISCOM
RFSS 1 · Site 134 (hex 86) · NAC B02
Control 150.8975, 155.46, 155.67
Wheeler · WISCOM
RFSS 1 · Site 135 (hex 87) · NAC B02
Control 150.8825, 154.9275
Voice 155.61
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dunn County

Common questions

What frequency does the fire department use in Dunn County?

Fire dispatch channels listed for Dunn County: Dunn County Fire 158.7750 MHz, narrow FM, 91.5 PL.

Do fire departments and EMS use a trunked radio system in Dunn County?

Yes. Fire and EMS talkgroups are listed for WISCOM: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dunn County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dunn County?

For Dunn County, start with the Elmwood site of WISCOM. Its control channels are 139.1625, 152.1425, 152.6525 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dunn County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Dunn County are marked encrypted.

Are Dunn County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Dunn County are marked encrypted.