Skip to content

Chippewa County Fire and EMS Frequencies

Chippewa County in Wisconsin has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 34 cities and communities below for local fire departments and EMS agencies.

About Chippewa County Fire and EMS Frequencies

Quick answer: Fire dispatch for Chippewa County: Chippewa County Fire 154.4300 MHz, narrow FM, 125 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Chippewa County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Chippewa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chippewa County FireChippewa County Fire – Dispatch – West154.4300
In 153.7700
125 DPLFMNWYK523
Chippewa County FireChippewa County Fire – Dispatch – East154.4300
In 153.7700
165 DPLFMNWYK523
Chippewa County FireFire/EMS Paging155.0700110.9 PLFMNKNGQ623
Chippewa County FireLocal Govt/Fire Tactical/Siren Control155.8350
In 153.9950
110.9 PLFMNKYA24

Radio system sites in Chippewa County

Program the control channel first; your scanner finds the voice channels from it.

Chippewa Falls · WISCOM
RFSS 1 · Site 50 (hex 32) · NAC b02
Control 139.3625, 139.8625, 152.8175
Voice 151.04, 155.355
Holcombe · WISCOM
RFSS 1 · Site 53 (hex 35) · NAC B0C
Control 139.0125, 151.265, 152.7425
Voice 155.385, 155.58
DOC Chippewa Falls · WISCOM
RFSS 1 · Site 202 (hex CA) · NAC B0C
Control 773.03125, 773.33125
Voice 773.78125, 774.08125, 774.53125
DOC Stanley · WISCOM
RFSS 1 · Site 216 (hex D8) · NAC B0C
Control 851.4375, 851.9375
Voice 852.4375, 852.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Chippewa County

Common questions

What frequency does the fire department use in Chippewa County?

Fire dispatch channels listed for Chippewa County: Chippewa County Fire 154.4300 MHz, narrow FM, 125 DPL.

What scanner do I need to listen to fire and EMS in Chippewa County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Chippewa County?

For Chippewa County, start with the Chippewa Falls site of WISCOM. Its control channels are 139.3625, 139.8625, 152.8175 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Chippewa County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Chippewa County are marked encrypted.