Skip to content

Naples Fire and EMS Frequencies

We do not have frequencies listed specifically for Naples in Buffalo County, Wisconsin yet. Countywide channels for Buffalo County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rock Falls (WISCOM), about 13 miles away.

About Naples Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Naples: Buffalo County Fire 154.3850 MHz, narrow FM, 156.7 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Buffalo County channels that also cover Naples

Fire Dispatch

Fire Dispatch frequencies for Buffalo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Buffalo County FireBuffalo County Fire – Dispatch154.3850
In 153.8900
156.7 PLFMNWQDU334

Nearest trunked radio sites

Distances are measured from the center of Naples.

Rock Falls · WISCOM
RFSS 1 · Site 134 (hex 86) · NAC B02 · about 13 mi away
Control 150.8975, 155.46, 155.67
Osseo · WISCOM
RFSS 1 · Site 56 (hex 38) · NAC b0e · about 18 mi away
Control 139.3125, 152.6225, 152.8025
Voice 151.01, 154.935
Nelson · WISCOM
RFSS 1 · Site 55 (hex 37) · NAC b05 · about 21 mi away
Control 139.0875, 152.0375, 152.1275
Voice 152.5325, 152.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Naples?

We do not have a fire dispatch channel listed specifically for Naples. The county-level fire dispatch channels in the same county: Buffalo County Fire 154.3850 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Naples?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Naples?

For Naples, start with the Rock Falls site of WISCOM. Its control channels are 150.8975, 155.46, 155.67 MHz. Program a control channel first; the scanner finds the voice channels from it.