Skip to content

Cross Fire and EMS Frequencies

We do not have frequencies listed specifically for Cross in Buffalo County, Wisconsin yet. Countywide channels for Buffalo County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Arcadia (WISCOM), about 7 miles away.

About Cross Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cross: Buffalo County Fire 154.3850 MHz, narrow FM, 156.7 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Buffalo County channels that also cover Cross

Fire Dispatch

Fire Dispatch frequencies for Buffalo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Buffalo County FireBuffalo County Fire – Dispatch154.3850
In 153.8900
156.7 PLFMNWQDU334

Nearest trunked radio sites

Distances are measured from the center of Cross.

Arcadia · WISCOM
RFSS 1 · Site 48 (hex 30) · NAC b0b · about 7 mi away
Control 139.7625, 152.5475, 152.6675
Voice 151.25, 151.34
Nelson · WISCOM
RFSS 1 · Site 55 (hex 37) · NAC b05 · about 24 mi away
Control 139.0875, 152.0375, 152.1275
Voice 152.5325, 152.6375
La Crescent · WISCOM
RFSS 1 · Site 21 (hex 15) · NAC b05 · about 29 mi away
Control 139.6625, 152.0225, 152.5625
Voice 151.115, 152.6825
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cross?

We do not have a fire dispatch channel listed specifically for Cross. The county-level fire dispatch channels in the same county: Buffalo County Fire 154.3850 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Cross?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Cross?

For Cross, start with the Arcadia site of WISCOM. Its control channels are 139.7625, 152.5475, 152.6675 MHz. Program a control channel first; the scanner finds the voice channels from it.