Skip to content

Tyler County Fire and EMS Frequencies

Tyler County in West Virginia has 8 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Tyler County Fire and EMS Frequencies

Quick answer: Fire dispatch for Tyler County: Tyler County Fire - Dispatch 46.1200 MHz, narrow FM, 71.9 PL. EMS dispatch for Tyler County: Tyler County EMS - Dispatch 151.4600 MHz, narrow FM, 97.4 PL. Trunked: WV SIRN: West Virginia Statewide Interoperable Radio Network, for example Tyler County Fire talkgroup 2501 (hex 9c5).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WV SIRN: West Virginia Statewide Interoperable Radio Network: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Tyler County, start with the Sistersville site of WV SIRN: West Virginia Statewide Interoperable Radio Network. Its control channels: 453.6875, 460.1125 MHz.

Data updated .

Tyler County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County Fire - DispatchTyler County Fire – Dispatch ( Low Band )46.120071.9 PLFMNKMK360
Tyler County Fire - DispatchTyler County Fire – Dispatch (Countywide)151.0325
In 159.0000
74.4 PLFMNWQNW546

Fire Talk-around

Fire Talk-around frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County FireTyler County Fire – RF Link – Klondike Tower for 46.12 MHz453.0000
In 458.0000
103.5 PLFMNKMK360

EMS Dispatch

EMS Dispatch frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County EMS - DispatchTyler County EMS – Dispatch (Countywide)151.4600
In 159.2700
97.4 PLFMNWQNW546

EMS Talk-around

EMS Talk-around frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County EMSTyler County EMS – RF Link – Sistersville Tower for 155.295 MHz453.2375
In 458.2375
174 DPLFMNWPEA832
Tyler County EMSTyler County EMS RF Link – Klondike Tower for 155.295 MHz463.0875
In 468.0875
94.8 PLFMNWQKH536

Hospitals & Medical

Hospitals & Medical frequencies for Tyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tyler County EMS to Sistersville General HospitalTyler County EMS to Sistersville General Hospital155.2950110.9 PLFMNKXE542
Tyler County EMS to Sistersville General HospitalTyler County EMS to Sistersville General Hospital155.3400FMNKXE542

Tyler County trunked talkgroups

WV SIRN: West Virginia Statewide Interoperable Radio Network

WV SIRN: West Virginia Statewide Interoperable Radio Network talkgroups
AgencyDescriptionTalkgroupHexMode
Tyler County FireFire and EMS – Dispatch25019c5D

Radio system sites in Tyler County

Program the control channel first; your scanner finds the voice channels from it.

Sistersville · WV SIRN: West Virginia Statewide Interoperable Radio Network
RFSS 3 · Site 4 (hex 4) · NAC 174
Control 453.6875, 460.1125
Voice 460.0875, 460.475, 460.7, 460.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Tyler County

Common questions

What frequency does the fire department use in Tyler County?

Fire dispatch channels listed for Tyler County: Tyler County Fire - Dispatch 46.1200 MHz, narrow FM, 71.9 PL.

What frequency does EMS or the ambulance service use in Tyler County?

EMS dispatch channels listed for Tyler County: Tyler County EMS - Dispatch 151.4600 MHz, narrow FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Tyler County?

Yes. Fire and EMS talkgroups are listed for WV SIRN: West Virginia Statewide Interoperable Radio Network: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Tyler County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Tyler County?

For Tyler County, start with the Sistersville site of WV SIRN: West Virginia Statewide Interoperable Radio Network. Its control channels are 453.6875, 460.1125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Tyler County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Tyler County are marked encrypted.

Are Tyler County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Tyler County are marked encrypted.