About Randolph County Fire and EMS Frequencies
Quick answer: Fire dispatch for Randolph County: Randolph County Fire 46.1000 MHz, narrow FM, 167.9 PL. EMS dispatch for Randolph County: EMS Agencies 46.0400 MHz, narrow FM, 107.2 PL. Trunked: WV SIRN: West Virginia Statewide Interoperable Radio Network, for example Randolph County Fire talkgroup 3101 (hex c1d).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WV SIRN: West Virginia Statewide Interoperable Radio Network: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Randolph County, start with the Valley Head / Wares Ridge site of WV SIRN: West Virginia Statewide Interoperable Radio Network. Its control channels: 453.25 MHz.
Data updated .
Randolph County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Fire | Randolph County Fire – Dispatch | 46.1000 | 167.9 PL | FMN | KNCJ395 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | EMS Agencies – Dispatch | 46.0400 | 107.2 PL | FMN | WQTM444 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | EMS Agencies – Repeater Patched to 46.040 | 151.3475 In 159.1425 | 103.5 PL | FMN | WQTM444 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Randolph County Medical Communications – EMS to Hospital | 155.2350 | FM | — |
Randolph County trunked talkgroups
WV SIRN: West Virginia Statewide Interoperable Radio Network
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | Randolph County Fire – Dispatch | 3101 | c1d | D |
| Randolph County Fire | Randolph County Fire – Tactical Channel | 3133 | c3d | D |
| Randolph County Fire | Randolph County Fire – Tactical Channel | 3135 | c3f | D |
| Randolph County Fire | Randolph County Fire – Tactical Channel | 3137 | c41 | D |
| Randolph County Fire | Randolph County Fire – Tactical Channel | 3139 | c43 | D |
| Randolph County Fire | Volunteer Fire Department – Company 41 Private | 3182 | c6e | D |
| Randolph County Fire | Volunteer Fire Department – Company 47 Private | 3189 | c75 | D |
| Randolph County EMS | Randolph County EMS – Dispatch | 3105 | c21 | D |
Radio system sites in Randolph County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Randolph County
- Adolph
- Aggregates
- Alpena
- Arnold Hill
- Bemis
- Beverly
- Bowden
- Brady Gate
- Bruxton
- Canfield
- Cassity
- Crystal Springs
- Czar
- Dailey
- Dryfork
- East Dailey
- Elkins
- Elkins Junction
- Elkwater
- Ellamore
- Evenwood
- Faulkner
- Glady
- Harman
- Helvetia
- Horton
- Huttonsville
- Jimtown
- Kerens
- Little Italy
- Mabie
- Mill Creek
- Mingo
- Monterville
- Montrose
- Newlonton
- Norton
- Osceola
- Pickens
- Pumpkintown
- Read
- Smith Crossing
- Spangler
- Sullivan
- Tigheville
- Upper Mingo
- Valley Bend
- Valley Head
- Weaver
- Whitmer
- Whyte
- Womelsdorf
- Womelsdorf (Coalton)
Common questions
What frequency does the fire department use in Randolph County?
Fire dispatch channels listed for Randolph County: Randolph County Fire 46.1000 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Randolph County?
EMS dispatch channels listed for Randolph County: EMS Agencies 46.0400 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Randolph County?
Yes. Fire and EMS talkgroups are listed for WV SIRN: West Virginia Statewide Interoperable Radio Network: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Randolph County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Randolph County?
For Randolph County, start with the Valley Head / Wares Ridge site of WV SIRN: West Virginia Statewide Interoperable Radio Network. Its control channels are 453.25 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Randolph County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Randolph County are marked encrypted.
Are Randolph County fire and EMS talkgroups encrypted?
None of the 8 talkgroups listed for Randolph County are marked encrypted.