About Gilmer County Fire and EMS Frequencies
Quick answer: Fire dispatch for Gilmer County: Gilmer County Fire - Dispatch 154.0400 MHz, narrow FM, 141.3 PL. EMS dispatch for Gilmer County: EMS Agencies 154.8450 MHz, narrow FM, 251 DPL.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Gilmer County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gilmer County Fire - Dispatch | Gilmer County Fire – Dispatch | 154.0400 In 155.3100 | 141.3 PL | FMN | WPWD457 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gilmer County Fire - Talkaround | Gilmer County Fire – Talkaround | 154.0400 | FMN | WPWD457 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gilmer County Fire | Gilmer County Fire | 39.1800 | FM | WNNS625 | |
| Gilmer County Fire - Private | Gilmer County Fire – Private | 154.0400 In 155.3100 | 110.9 PL | FMN | WPWD457 |
| Gilmer County Fire MRE | Gilmer County Fire MRE | 453.8250 | FMN | WPWD457 | |
| Gilmer County Fire MRE | Gilmer County Fire MRE | 458.8250 | FMN | WPWD457 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Gilmer County EMS – Dispatch (New) | 154.8450 In 158.9175 | 251 DPL | FMN | WQKF272 |
| EMS Agencies | Gilmer County EMS – Dispatch | 155.2350 | 103.5 PL | FM | KNCZ233 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Health Net Helo Landing Zone Operations | 154.4000 | 110.9 PL | FM | — |
Radio system sites in Gilmer County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Gilmer County
Common questions
What frequency does the fire department use in Gilmer County?
Fire dispatch channels listed for Gilmer County: Gilmer County Fire - Dispatch 154.0400 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Gilmer County?
EMS dispatch channels listed for Gilmer County: EMS Agencies 154.8450 MHz, narrow FM, 251 DPL.
What scanner do I need to listen to fire and EMS in Gilmer County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Gilmer County?
For Gilmer County, start with the Glenville site of WV SIRN: West Virginia Statewide Interoperable Radio Network. Its control channels are 451.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gilmer County fire and EMS frequencies encrypted?
None of the 9 conventional frequencies listed for Gilmer County are marked encrypted.