Skip to content

Shenandoah County Fire and EMS Frequencies

Shenandoah County in Virginia has 5 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Shenandoah County Fire and EMS Frequencies

Quick answer: Fire dispatch for Shenandoah County: Shenandoah, County of 453.1125 MHz, narrow FM, 192.8 PL. Trunked: Shenandoah County, for example Fire and Rescue talkgroup 1300 (hex 514).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Shenandoah County: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Shenandoah County, start with the North Simulcast site of Shenandoah County. Its control channels: 451.125, 452.475 MHz.

Data updated .

Shenandoah County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Shenandoah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shenandoah, County ofFire/EMS Dispatch (Channel 5/6) (Link to 453.3000)453.1125
In 458.1125
192.8 PLFMNWNPZ886
Shenandoah, County ofFire/EMS Dispatch (Channel 1/2)453.3000
In 458.3000
151.4 PLFMNWNPZ886

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Shenandoah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shenandoah, County ofFire/EMS Operations (Channel 7/8)453.2250
In 458.2250
754 DPLFMNWNPZ886
Shenandoah, County ofFire/EMS Operations (Channel 3/4)453.4000
In 458.4000
612 DPLFMNWNPZ886
Shenandoah, County ofShenandoah, County of – Fire Ground (Zepp Mountain)460.1000
In 465.1000
FMNWNPZ886

Shenandoah County trunked talkgroups

Shenandoah County

Shenandoah County talkgroups
AgencyDescriptionTalkgroupHexMode
Fire and RescueFire and Rescue – Dispatch1300514T
Fire and RescueOperations1301515T
Fire and RescueOperations1302516T
Fire and RescueOperations1303517T
Fire and RescueOperations1304518T
Fire and RescueTraining1305519T
Fire and RescueTraining130651aT

Radio system sites in Shenandoah County

Program the control channel first; your scanner finds the voice channels from it.

North Simulcast · Shenandoah County
RFSS 1 · Site 1 (hex 1) · NAC A61
Control 451.125, 452.475
Voice 451.15, 452.825, 453.5125, 460.4625
South Simulcast · Shenandoah County
RFSS 1 · Site 2 (hex 2) · NAC A62
Control 451.2625, 452.425, 453.6125
Voice 451.1625, 451.25, 460.375, 460.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Shenandoah County

Common questions

What frequency does the fire department use in Shenandoah County?

Fire dispatch channels listed for Shenandoah County: Shenandoah, County of 453.1125 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Shenandoah County?

Yes. Fire and EMS talkgroups are listed for Shenandoah County: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Shenandoah County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Shenandoah County?

For Shenandoah County, start with the North Simulcast site of Shenandoah County. Its control channels are 451.125, 452.475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Shenandoah County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Shenandoah County are marked encrypted.

Are Shenandoah County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Shenandoah County are marked encrypted.