Skip to content

Prince Edward County Fire and EMS Frequencies

Prince Edward County in Virginia has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Prince Edward County Fire and EMS Frequencies

Quick answer: Fire dispatch for Prince Edward County: Prince Edward, County of 460.5250 MHz, narrow FM, 263 DPL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Prince Edward County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Prince Edward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prince Edward, County ofPrince Edward, County of – Dispatch460.5250
In 465.5250
263 DPLFMNWPAH610

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Prince Edward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prince Edward, County ofPrince Edward, County of – Tactical Channel453.4000263 DPLFMNWPAH610
Prince Edward, County ofPrince Edward, County of – Tactical Channel458.4000263 DPLFMNWPAH610
Prince Edward, County ofPrince Edward, County of – Tactical Channel465.5500263 DPLFMNWPAH610

Hospitals & Medical

Hospitals & Medical frequencies for Prince Edward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Prince Edward, County ofEMS to Southside Community Hospital155.3400FM—

Radio system sites in Prince Edward County

Program the control channel first; your scanner finds the voice channels from it.

Leigh Mountain · Virginia Statewide Agencies Radio System (STARS)
RFSS 2 · Site 3 (hex 3) · NAC 198
Control 152.5625, 152.6075
Voice 152.5175, 152.7575, 152.8175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Prince Edward County

Common questions

What frequency does the fire department use in Prince Edward County?

Fire dispatch channels listed for Prince Edward County: Prince Edward, County of 460.5250 MHz, narrow FM, 263 DPL.

What scanner do I need to listen to fire and EMS in Prince Edward County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Prince Edward County?

For Prince Edward County, start with the Leigh Mountain site of Virginia Statewide Agencies Radio System (STARS). Its control channels are 152.5625, 152.6075 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Prince Edward County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Prince Edward County are marked encrypted.