Skip to content

New Kent County Fire and EMS Frequencies

New Kent County in Virginia has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About New Kent County Fire and EMS Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

New Kent County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for New Kent County
AgencyDescriptionFrequency (MHz)ToneModeFCC
New Kent, County ofFire/Rescue "Fire Safety-1"155.6175
In 153.7925
229.1 PLFMN EncryptedWPRH601

Radio system sites in New Kent County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · New Kent / Charles City
RFSS 10 · Site 10 (hex A) · NAC 00A
Control 856.1875, 856.6875, 857.0625, 857.6125, 858.0875, 859.0625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in New Kent County

Common questions

What scanner do I need to listen to fire and EMS in New Kent County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in New Kent County?

For New Kent County, start with the Simulcast site of New Kent / Charles City. Its control channels are 856.1875, 856.6875, 857.0625, 857.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are New Kent County fire and EMS frequencies encrypted?

1 of the 1 conventional frequencies listed for New Kent County are marked encrypted; a scanner cannot decode encrypted audio.