Skip to content

Mathews County Fire and EMS Frequencies

Mathews County in Virginia has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Mathews County Fire and EMS Frequencies

Quick answer: Fire dispatch for Mathews County: Mathews, County of 154.1000 MHz, narrow FM, 167.9 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Mathews County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Mathews County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mathews, County ofFire/Rescue Dispatch154.1000
In 156.0150
167.9 PLFMNWNZN469

Radio system sites in Mathews County

Program the control channel first; your scanner finds the voice channels from it.

Mathews · Middle Peninsula Northern Neck Regional Radio System
RFSS 51 · Site 51 (hex 33) · NAC 00A
Control 453.4125, 453.5875, 453.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Mathews County

Common questions

What frequency does the fire department use in Mathews County?

Fire dispatch channels listed for Mathews County: Mathews, County of 154.1000 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Mathews County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Mathews County?

For Mathews County, start with the Mathews site of Middle Peninsula Northern Neck Regional Radio System. Its control channels are 453.4125, 453.5875, 453.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Mathews County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Mathews County are marked encrypted.