Skip to content

Lunenburg County Fire and EMS Frequencies

Lunenburg County in Virginia has 3 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Lunenburg County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lunenburg County: Kenbridge, Town of Fire 155.3625 MHz, FM, 125 DPL; Lunenburg, County of 45.4000 MHz, FM, CSQ; Victoria, Town of Fire 453.4875 MHz, FM, 192.8 PL. Trunked: Lunenburg County, for example Lunenburg County Fire talkgroup 9500 (hex 251c).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Lunenburg County: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lunenburg County, start with the Simulcast site of Lunenburg County. Its control channels: 770.06875, 771.93125, 773.39375 MHz.

Data updated .

Lunenburg County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lunenburg County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kenbridge, Town of FireEmergency Squad155.3625
In 150.7825
125 DPLFMWPRH271
Lunenburg, County ofLunenburg, County of – Dispatch45.4000CSQFMKRW224
Victoria, Town of FireFire/Rescue Dispatch453.4875
In 458.4875
192.8 PLFMWPUW296

Lunenburg County trunked talkgroups

Lunenburg County

Lunenburg County talkgroups
AgencyDescriptionTalkgroupHexMode
Lunenburg County FirePrince Edward Fire Dispatch Patch9500251cT
Lunenburg County FireLunenburg County Fire – Dispatch991026b6T
Lunenburg County FireOperations991126b7T
Lunenburg County FireOperations991226b8T
Lunenburg County FireOperations991326b9T
Lunenburg County EMSLunenburg County EMS – Dispatch992026c0T

Radio system sites in Lunenburg County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · Lunenburg County
RFSS 10 · Site 10 (hex A) · NAC A
Control 770.06875, 771.93125, 773.39375, 774.71875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lunenburg County

Common questions

What frequency does the fire department use in Lunenburg County?

Fire dispatch channels listed for Lunenburg County: Kenbridge, Town of Fire 155.3625 MHz, FM, 125 DPL; Lunenburg, County of 45.4000 MHz, FM, CSQ; Victoria, Town of Fire 453.4875 MHz, FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Lunenburg County?

Yes. Fire and EMS talkgroups are listed for Lunenburg County: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lunenburg County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lunenburg County?

For Lunenburg County, start with the Simulcast site of Lunenburg County. Its control channels are 770.06875, 771.93125, 773.39375, 774.71875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lunenburg County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Lunenburg County are marked encrypted.

Are Lunenburg County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Lunenburg County are marked encrypted.