Skip to content

Lancaster County Fire and EMS Frequencies

Lancaster County in Virginia has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Lancaster County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lancaster County: Lancaster, County of 155.7975 MHz, narrow FM, 162.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lancaster County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lancaster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lancaster, County ofLancaster, County of – Dispatch155.7975
In 154.0325
162.2 PLFMNWQCX475
Lancaster, County ofLancaster, County of – Dispatch158.8425
In 153.7625
123.0 PLFMNWNQW219

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lancaster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lancaster, County ofFire/Rescue Fireground154.205088.5 PLFMNWPFJ792
Lancaster, County ofFire/Rescue Fireground155.0250CSQFMNWQAI288

Radio system sites in Lancaster County

Program the control channel first; your scanner finds the voice channels from it.

Lancaster Simulcast · Middle Peninsula Northern Neck Regional Radio System
RFSS 70 · Site 70 (hex 46)
Control 453.1875, 453.375, 453.5375, 453.6875, 453.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lancaster County

Common questions

What frequency does the fire department use in Lancaster County?

Fire dispatch channels listed for Lancaster County: Lancaster, County of 155.7975 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Lancaster County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lancaster County?

For Lancaster County, start with the Lancaster Simulcast site of Middle Peninsula Northern Neck Regional Radio System. Its control channels are 453.1875, 453.375, 453.5375, 453.6875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lancaster County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Lancaster County are marked encrypted.